Events
Microsoft 365 Community Conference
May 6, 2 PM - May 9, 12 AM
Skill up for the era of AI at the ultimate community-led Microsoft 365 event, May 6-8 in Las Vegas.
Learn moreThis browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
Loop components and integrations are backed by .loop
files (earlier releases of Loop created these as .fluid
files), stored in OneDrive, SharePoint, or SharePoint Embedded. IT administrators need to manage creation of Loop content and integrations using BOTH:
Loop workspaces, Copilot Pages, and the .loop
files and content created in Loop workspaces are stored in SharePoint Embedded containers. IT admins can manage creation of Loop workspaces using Cloud Policy.
Just like other Microsoft 365 experiences, Loop and Copilot Pages also leverage core services across SharePoint and Microsoft 365. To effectively enable creation of Loop content and Loop integration experiences, Copilot Pages, or OneDrive and SharePoint files-backed experiences powered by Fluid Framework, follow the instructions in the Office 365 URLs and IP address ranges to ensure connections to Loop services are available and enabled.
Loop's near real-time communications are enabled by the core services that run a WebSocket server. Coauthors in the same session need to establish secured WebSocket connections to this service to send and receive collaborative data such as changes made by others, live cursors, presence, and so on. These experiences are crucial to Loop, and to all the scenarios powered by Fluid framework. Allow list WebSocket traffic to the *.svc.ms
and *.office.com
endpoints.
Licensing through the new Loop with workspaces service plan covers the creation of new workspaces and management of workspace members. The full set of experiences enabled and the specific licenses that include the Loop with workspaces service plan are covered in Loop access via Microsoft 365 subscriptions. Loop components are available to anyone in Entra ID accounts with a OneDrive or SharePoint license.
If you want to scope the Cloud Policy settings to only some users in your tenant, you must create or use an existing Microsoft 365 group that defines which users in your organization this policy will apply to. To create a Microsoft 365 group, see Create a Microsoft 365 group.
Note
This section isn't required if you choose to apply the Loop settings to all the users in your tenant.
You'll be able to use this group for the Cloud Policy setup procedure specified in Settings management in Cloud Policy.
If you prefer, you can also create other types of groups to use with Cloud Policy. For more information, see learn more about creating groups in the Microsoft 365 admin center or learn more about creating dynamic groups in AzureAD.
There are several IT Admin policy settings provided to enable creation of Loop content across Microsoft 365:
Configure | Setting Type | Specific Policy | Notes |
---|---|---|---|
Loop workspaces creation | Cloud Policy | Create Loop workspaces in Loop | Applies to: Loop workspaces (previously titled Create and view Loop workspaces in Loop) |
Loop component creation and integration across Microsoft 365 | Cloud Policy | Create and view Loop files in Microsoft apps that support Loop | Applies to: - Outlook integration - Teams New Calendar integration - OneNote integration - Whiteboard integration Does NOT apply to: - Loop workspaces - Teams integration - Copilot Pages |
Copilot Pages creation and integration | Cloud Policy | Create and view Loop files in Microsoft 365 Copilot Chat | Applies to: Copilot Pages in a Copilot chat experience |
Outlook creation and integration of Loop experiences | Cloud Policy | Create and view Loop files in Outlook | First checks Create and view Loop files in Microsoft apps that support Loop; then applies Create and view Loop files in Outlook, if applicable. Applies to: - Outlook - Teams New Calendar |
Teams creation and integration | SharePoint property | See Settings management for Loop components in Teams | Teams only checks the settings in this row. |
Configure the creation of content in these locations by using the appropriate policy setting:
Loop content originally created in | ️️️Manage with this policy | Loop content storage |
---|---|---|
Loop app | Cloud Policy: Create Loop workspaces in Loop | SharePoint Embedded: ✔️in Loop workspace |
Copilot Pages | Cloud Policy: Create and view Loop files in Microsoft 365 Copilot Chat | SharePoint Embedded: ✔️in Loop workspace |
Teams channel meeting (Teams Classic Calendar) | SharePoint property Set-SPOTenant -IsCollabMeetingNotesFluidEnabled $true |
SharePoint Site: 📁Meetings |
Teams channel meeting (Teams New Calendar) | Cloud Policy: Create and view Loop files in Microsoft apps that support Loop -or- Create and view Loop files in Outlook | SharePoint Site: 📁Meetings |
Teams channel | SharePoint property Set-SPOTenant -IsCollabMeetingNotesFluidEnabled $true |
SharePoint Site: ✔️in Channel folder |
Teams private chat | SharePoint property Set-SPOTenant -IsLoopEnabled $true |
User's OneDrive: 📁Microsoft Teams Chat files |
Teams private meeting (Teams Classic Calendar) | SharePoint property Set-SPOTenant -IsLoopEnabled $true |
User's OneDrive: 📁Meetings |
Teams private meeting (Teams New Calendar) | Cloud Policy: Create and view Loop files in Microsoft apps that support Loop -or- Create and view Loop files in Outlook | User's OneDrive: 📁Meetings |
Outlook email message | Cloud Policy: Create and view Loop files in Microsoft apps that support Loop -or- Create and view Loop files in Outlook | User's OneDrive: 📁Attachments |
OneNote for Windows or for the web | Cloud Policy: Create and view Loop files in Microsoft apps that support Loop | User's OneDrive: 📁OneNote Loop files |
Whiteboard | Cloud Policy: Create and view Loop files in Microsoft apps that support Loop | User's OneDrive: 📁Whiteboard\Components |
Scenario | Policies Configured |
---|---|
✅Enable Loop workspaces creation and Loop component creation and integration everywhere | ✅ Create Loop workspaces in Loop = Enabled (or Not Configured) ✅ Create and view Loop files in Microsoft apps that support Loop = Enabled (or Not Configured) ✅ Create and view Loop files in Microsoft 365 Copilot Chat = Enabled (or Not Configured) ✅ [Teams-only] Set-SPOTenant -IsLoopEnabled $true , Set-SPOTenant -IsCollabMeetingNotesFluidEnabled $true |
✅Enable Loop workspaces creation and Loop component creation and integration everywhere, but ⛔Disable Loop component creation and integration in Communication apps (Outlook, Teams) | ✅ Create Loop workspaces in Loop = Enabled (or Not Configured) ✅ Create and view Loop files in Microsoft apps that support Loop = Enabled (or Not Configured) ✅ Create and view Loop files in Microsoft 365 Copilot Chat = Enabled (or Not Configured) ⛔ Create and view Loop files in Outlook = Disabled ⛔ [Teams-only] Set-SPOTenant -IsLoopEnabled $false , Set-SPOTenant -IsCollabMeetingNotesFluidEnabled $false |
⛔Disable Loop workspace creation and Loop component creation and integration everywhere | ⛔ Create Loop workspaces in Loop = Disabled ⛔ Create and view Loop files in Microsoft apps that support Loop = Disabled ⛔ Create and view Loop files in Microsoft 365 Copilot Chat = Disabled ⛔ [Teams-only] Set-SPOTenant -IsLoopEnabled $false , Set-SPOTenant -IsCollabMeetingNotesFluidEnabled $false |
As described in this topic, you can control the ability for users in your environment to create new Loop content. You cannot prevent access to existing content using the admin controls. You can configure the admin controls via select groups or for your entire tenant (except for the Teams controls, which apply to the entire tenant only).
When Loop IT admin controls are set to Disabled, the creation of new Loop files and SharePoint Embedded containers is prevented. Existing user data isn't deleted, and users can still find, see, and access existing Loop files and Loop workspaces.
Even with the admin policies disabled, Loop content and icons may still appear in certain places. Files created before disabling new creation can still be found in Microsoft365.com, the Loop component viewer and editor (loop.cloud.microsoft), and links shared in messages or documents. Access to these files is determined by their permissions, so users with edit access can still open and edit them.
There are no separate licensing requirements for the Loop component viewer and editor, only the need for OneDrive access. Users can still access the Loop component viewer and editor via loop.cloud.microsoft and the All apps view in Microsoft365.com. To prevent users from seeing the Loop icon in the All apps view, disable their access to OneDrive or configure a conditional access policy for loop.cloud.microsoft to block navigation to Loop.
If you're looking for a simple way to turn on or off the creation of only Loop workspaces in your tenant, do the following:
Sign in to the Microsoft 365 admin center as Office Apps Administrator, Security Administrator, or Global Administrator.
Important
Microsoft recommends that you use roles with the fewest permissions. This helps improve security for your organization. Global Administrator is a highly privileged role that should be limited to emergency scenarios when you can't use an existing role.
Navigate to Home > Org settings > Services > Loop.
Choose your desired state for Loop workspaces via the checkbox.
Note
The checkbox may not reflect your configured state on load. However, the state you select and choose Save in the Admin Center will persist and override any defaults for your tenant.
Select Save.
The Microsoft Admin Center configures the Cloud Policy setting Create Loop workspaces in Loop, described in the next section, targeted at All users (your full tenant). See the next section if you wish to perform more advanced controls. If you configured Create Loop workspaces in Loop in Cloud Policy, review your Cloud Policy settings to confirm they still match your expectation after configuring in the Microsoft Admin Center.
The Loop experiences (except for Microsoft Teams) check the following Cloud Policy settings. See Available policy settings to understand how each app checks these settings:
Note
If your organization has disabled the creation of OneDrive, regardless of the setting noted here, these people in your organization won't be able to create a Copilot Pages workspace.
In case you create a new policy configuration or change the configuration for an existing policy, there can be a delay in the change being reflected as described below:
Note
In order to target only a group of users in your organization to be able to create and view Loop content in workspaces, create a second group that targets All users, set this group to Disabled, and make it a priority number that evaluates after your first target group that is set to Enabled. In Cloud Policy, priority 0 evaluates first, followed by priority 1, then 2, and so on. This configuration will override the default Not Configured state to Disabled for all users but your target group.
You'll need the latest version of SharePoint PowerShell module to enable or disable Loop experiences in Teams. Loop components default to ON for all organizations. Because Loop components are designed for collaboration, the components are always shared as editable by others, even if your organization is set to create shareable links that have view-only permissions as the default value for other file types. For more information, see the Learn more link next to the setting.
Experience | SharePoint organization properties | Notes |
---|---|---|
Loop components in Teams | IsLoopEnabled (boolean) |
This property controls Loop component creation and integration in Microsoft Teams. It applies to the entire tenant and can't be configured at the user level. |
Collaborative meeting notes | IsCollabMeetingNotesFluidEnabled (boolean) |
This property controls the collaborative meeting notes creation and integration in Microsoft Teams. It applies to the entire tenant and can't be configured at the user level. The SharePoint organization property doesn't apply to collaborative meeting notes in Teams New Calendar, see Settings management in Cloud Policy. |
To check your tenant's default file permissions, perform the following steps:
To check if Loop components are enabled, run Get-SPOTenant
without any arguments. Verify the value of IsLoopEnabled
is true.
To enable Loop components in Teams, run Set-SPOTenant -IsLoopEnabled $true
. The change will take a short time to apply across your organization.
To disable Loop components in Teams, run Set-SPOTenant -IsLoopEnabled $false
. The change will take a short time to apply across your organization. If your organization has multiple regions (that is, organization URLs), you need to disable loop components for all the regions to have consistent results across the organization.
Events
Microsoft 365 Community Conference
May 6, 2 PM - May 9, 12 AM
Skill up for the era of AI at the ultimate community-led Microsoft 365 event, May 6-8 in Las Vegas.
Learn moreTraining
Learning path
Use advance techniques in canvas apps to perform custom updates and optimization - Training
Use advance techniques in canvas apps to perform custom updates and optimization
Certification
Microsoft 365 Certified: Teams Administrator Associate - Certifications
Demonstrate skills to plan, deploy, configure, and manage Microsoft Teams to focus on efficient and effective collaboration and communication in a Microsoft 365 environment.