Convert.ToUInt32 Methode

Definition

Konvertiert einen angegebenen Wert in eine 32-Bit-Ganzzahl ohne Vorzeichen.

Überlädt

ToUInt32(String)

Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(UInt64)

Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl ohne Vorzeichen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(UInt16)

Konvertiert den Wert der angegebenen 16-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(UInt32)

Gibt die angegebene 32-Bit-Ganzzahl ohne Vorzeichen zurück. Es wird keine wirkliche Konvertierung durchgeführt.

ToUInt32(DateTime)

Beim Aufrufen dieser Methode wird immer eine InvalidCastException ausgelöst.

ToUInt32(String, IFormatProvider)

Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(String, Int32)

Konvertiert die Zeichenfolgendarstellung einer Zahl in einer angegebenen Basis in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Single)

Konvertiert den Wert der angegebenen Gleitkommazahl mit einfacher Genauigkeit in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Object, IFormatProvider)

Konvertiert den Wert des angegebenen Objekts unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in eine 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(SByte)

Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl mit Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Char)

Konvertiert den Wert des angegebenen Unicode-Zeichens in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Int64)

Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Int32)

Konvertiert den Wert der angegebenen 32-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Int16)

Konvertiert den Wert der angegebenen 16-Bit-Ganzzahl mit Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Double)

Konvertiert den Wert der angegebenen Gleitkommazahl mit doppelter Genauigkeit in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Decimal)

Konvertiert den Wert der angegebenen Dezimalzahl in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Object)

Konvertiert den Wert des angegebenen Objekts in eine 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Byte)

Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(Boolean)

Konvertiert den angegebenen booleschen Wert in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

ToUInt32(String)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::String ^ value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (string value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (string? value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : string -> uint32
Public Shared Function ToUInt32 (value As String) As UInteger

Parameter

value
String

Eine Zeichenfolge, die die zu konvertierende Zahl enthält.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die der Zahl in value entspricht, oder 0 (null), wenn value gleich null ist.

Attribute

Ausnahmen

value besteht nicht aus einem optionalen Vorzeichen und einer Folge von Ziffern (0 bis 9).

value stellt eine Zahl dar, die kleiner als UInt32.MinValue oder größer als UInt32.MaxValue ist.

Beispiele

Im folgenden Beispiel werden die Elemente in einem Zeichenfolgenarray als numerische Zeichenfolgen interpretiert und versucht, sie in ganze Zahlen ohne Vorzeichen zu konvertieren.

string[] values = { "One", "1.34e28", "-26.87", "-18", "-6.00",
                    " 0", "137", "1601.9", Int32.MaxValue.ToString() };
uint result;

foreach (string value in values)
{
   try {
      result = Convert.ToUInt32(value);
      Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value '{1}' is outside the range of the UInt32 type.",
                        value.GetType().Name, value);
   }
   catch (FormatException) {
      Console.WriteLine("The {0} value '{1}' is not in a recognizable format.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//    The String value 'One' is not in a recognizable format.
//    The String value '1.34e28' is not in a recognizable format.
//    The String value '-26.87' is not in a recognizable format.
//    The String value '-18' is outside the range of the UInt32 type.
//    The String value '-6.00' is not in a recognizable format.
//    Converted the String value ' 0' to the UInt32 value 0.
//    Converted the String value '137' to the UInt32 value 137.
//    The String value '1601.9' is not in a recognizable format.
//    Converted the String value '2147483647' to the UInt32 value 2147483647.
let values =
    [| "1603"; "1,603"; "one"; "1.6e03"
       "1.2e-02"; "-1326"; "1074122" |]

for value in values do
    try
        let result = Convert.ToUInt16 value
        printfn $"Converted the {value.GetType().Name} value '{value}' to the {result.GetType().Name} value {result}."
    with
    | :? FormatException ->
        printfn $"The {value.GetType().Name} value {value} is not in a recognizable format."
    | :? OverflowException ->
        printfn $"{value} is outside the range of the UInt32 type." 
// The example displays the following output:
//    Converted the String value '1603' to the UInt32 value 1603.
//    The String value 1,603 is not in a recognizable format.
//    The String value one is not in a recognizable format.
//    The String value 1.6e03 is not in a recognizable format.
//    The String value 1.2e-02 is not in a recognizable format.
//    -1326 is outside the range of the UInt32 type.
//    1074122 is outside the range of the UInt32 type.
Dim values() As String = { "One", "1.34e28", "-26.87", "-18", "-6.00", _
                           " 0", "137", "1601.9", Int32.MaxValue.ToString() }
Dim result As UInteger

For Each value As String In values
   Try
      result = Convert.ToUInt32(value)
      Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.", _
                        value.GetType().Name, value, result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        value.GetType().Name, value)
   Catch e As FormatException
      Console.WriteLine("The {0} value '{1}' is not in a recognizable format.", _
                        value.GetType().Name, value)
   End Try
Next
' The example displays the following output:
'    The String value 'One' is not in a recognizable format.
'    The String value '1.34e28' is not in a recognizable format.
'    The String value '-26.87' is not in a recognizable format.
'    The String value -18 is outside the range of the UInt32 type.
'    The String value '-6.00' is not in a recognizable format.
'    Converted the String value ' 0' to the UInt32 value 0.
'    Converted the String value '137' to the UInt32 value 137.
'    The String value '1601.9' is not in a recognizable format.
'    Converted the String value '2147483647' to the UInt32 value 2147483647.

Hinweise

Die Verwendung der ToUInt32(String) -Methode entspricht der Übergabe value an die UInt32.Parse(String) -Methode. value wird mithilfe der Formatierungskonventionen der aktuellen Kultur interpretiert.

Wenn Sie es vorziehen, keine Ausnahme zu behandeln, wenn die Konvertierung fehlschlägt, können Sie stattdessen die UInt32.TryParse -Methode aufrufen. Es gibt einen Boolean Wert zurück, der angibt, ob die Konvertierung erfolgreich war oder fehlgeschlagen ist.

Gilt für:

ToUInt32(UInt64)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl ohne Vorzeichen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::UInt64 value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (ulong value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : uint64 -> uint32
Public Shared Function ToUInt32 (value As ULong) As UInteger

Parameter

value
UInt64

Die zu konvertierende 64-Bit-Ganzzahl ohne Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Ausnahmen

value ist größer als UInt32.MaxValue.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem ganzzahligen Array ohne Vorzeichen in einen ganzzahligen Wert ohne Vorzeichen zu konvertieren.

ulong[] numbers = { UInt64.MinValue, 121, 340, UInt64.MaxValue };
uint result;
foreach (ulong number in numbers)
{
   try {
      result = Convert.ToUInt32(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//    Converted the UInt64 value 0 to the UInt32 value 0.
//    Converted the UInt64 value 121 to the UInt32 value 121.
//    Converted the UInt64 value 340 to the UInt32 value 340.
//    The UInt64 value 18446744073709551615 is outside the range of the UInt32 type.
let numbers = [| UInt64.MinValue; 121uL; 340uL; UInt64.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the UInt32 type."
// The example displays the following output:
//    Converted the UInt64 value '0' to the UInt32 value 0.
//    Converted the UInt64 value '121' to the UInt32 value 121.
//    Converted the UInt64 value '340' to the UInt32 value 340.
//    The UInt64 value 18446744073709551615 is outside the range of the UInt32 type.
Dim numbers() As ULong = { UInt64.MinValue, 121, 340, UInt64.MaxValue }
Dim result As UInteger

For Each number As ULong In numbers
   Try
      result = Convert.ToUInt32(number)
      Console.WriteLine("Converted the {0} value {1} to a {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'    Converted the UInt64 value 0 to a UInt32 value 0.
'    Converted the UInt64 value 121 to a UInt32 value 121.
'    Converted the UInt64 value 340 to a UInt32 value 340.
'    The UInt64 value 18446744073709551615 is outside the range of the UInt32 type.

Gilt für:

ToUInt32(UInt16)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 16-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::UInt16 value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (ushort value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : uint16 -> uint32
Public Shared Function ToUInt32 (value As UShort) As UInteger

Parameter

value
UInt16

Die zu konvertierende 16-Bit-Ganzzahl ohne Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Beispiele

Im folgenden Beispiel wird jedes Element in einem ganzzahligen Array ohne Vorzeichen mit 16 Bit in einen ganzzahligen Wert ohne Vorzeichen konvertiert.

ushort[] numbers = { UInt16.MinValue, 121, 340, UInt16.MaxValue };
uint result;
foreach (ushort number in numbers)
{
   result = Convert.ToUInt32(number);
   Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                     number.GetType().Name, number,
                     result.GetType().Name, result);
}
// The example displays the following output:
//    Converted the UInt16 value 0 to the UInt32 value 0.
//    Converted the UInt16 value 121 to the UInt32 value 121.
//    Converted the UInt16 value 340 to the UInt32 value 340.
//    Converted the UInt16 value 65535 to the UInt32 value 65535.
let numbers = [| UInt16.MinValue; 121us; 340us; UInt16.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the UInt32 type."
                        
// The example displays the following output:
//    Converted the UInt16 value '0' to the UInt32 value 0.
//    Converted the UInt16 value '121' to the UInt32 value 121.
//    Converted the UInt16 value '340' to the UInt32 value 340.
//    The UInt16 value 4294967295 is outside the range of the UInt32 type.
Dim numbers() As UShort = { UInt16.MinValue, 121, 340, UInt16.MaxValue }
Dim result As UInteger

For Each number As UShort In numbers
   result = Convert.ToUInt32(number)
   Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                     number.GetType().Name, number, _
                     result.GetType().Name, result)
Next
' The example displays the following output:
'    Converted the UInt16 value 0 to the UInt32 value 0.
'    Converted the UInt16 value 121 to the UInt32 value 121.
'    Converted the UInt16 value 340 to the UInt32 value 340.
'    Converted the UInt16 value 65535 to the UInt32 value 65535.

Gilt für:

ToUInt32(UInt32)

Wichtig

Diese API ist nicht CLS-kompatibel.

Gibt die angegebene 32-Bit-Ganzzahl ohne Vorzeichen zurück. Es wird keine wirkliche Konvertierung durchgeführt.

public:
 static System::UInt32 ToUInt32(System::UInt32 value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (uint value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : uint32 -> uint32
Public Shared Function ToUInt32 (value As UInteger) As UInteger

Parameter

value
UInt32

Die zurückzugebende 32-Bit-Ganzzahl ohne Vorzeichen.

Gibt zurück

value wird unverändert zurückgegeben.

Attribute

Gilt für:

ToUInt32(DateTime)

Wichtig

Diese API ist nicht CLS-kompatibel.

Beim Aufrufen dieser Methode wird immer eine InvalidCastException ausgelöst.

public:
 static System::UInt32 ToUInt32(DateTime value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (DateTime value);
public static uint ToUInt32 (DateTime value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : DateTime -> uint32
static member ToUInt32 : DateTime -> uint32
Public Shared Function ToUInt32 (value As DateTime) As UInteger

Parameter

value
DateTime

Der Datums- und Uhrzeitwert, der konvertiert werden soll.

Gibt zurück

Diese Konvertierung wird nicht unterstützt. Es wird kein Wert zurückgegeben.

Attribute

Ausnahmen

Diese Konvertierung wird nicht unterstützt.

Gilt für:

ToUInt32(String, IFormatProvider)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert die angegebene Zeichenfolgendarstellung einer Zahl unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::String ^ value, IFormatProvider ^ provider);
[System.CLSCompliant(false)]
public static uint ToUInt32 (string value, IFormatProvider provider);
[System.CLSCompliant(false)]
public static uint ToUInt32 (string? value, IFormatProvider? provider);
[<System.CLSCompliant(false)>]
static member ToUInt32 : string * IFormatProvider -> uint32
Public Shared Function ToUInt32 (value As String, provider As IFormatProvider) As UInteger

Parameter

value
String

Eine Zeichenfolge, die die zu konvertierende Zahl enthält.

provider
IFormatProvider

Ein Objekt, das kulturspezifische Formatierungsinformationen bereitstellt.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die der Zahl in value entspricht, oder 0 (null), wenn value gleich null ist.

Attribute

Ausnahmen

value besteht nicht aus einem optionalen Vorzeichen und einer Folge von Ziffern (0 bis 9).

value stellt eine Zahl dar, die kleiner als UInt32.MinValue oder größer als UInt32.MaxValue ist.

Beispiele

Im folgenden Beispiel wird ein benutzerdefiniertes NumberFormatInfo Objekt definiert, das die Zeichenfolge "pos" als positives Zeichen und die Zeichenfolge "neg" als negatives Zeichen erkennt. Anschließend wird versucht, jedes Element eines numerischen Zeichenfolgenarrays mithilfe dieses Anbieters und des NumberFormatInfo Anbieters für die invariante Kultur in eine ganze Zahl zu konvertieren.

using System;
using System.Globalization;

public class Class1
{
   public static void Main()
   {
      // Create a NumberFormatInfo object and set several of its
      // properties that apply to numbers.
      NumberFormatInfo provider = new NumberFormatInfo();
      provider.PositiveSign = "pos ";
      provider.NegativeSign = "neg ";

      // Define an array of numeric strings.
      string[] values = { "123456789", "+123456789", "pos 123456789",
                          "123456789.", "123,456,789",  "4294967295",
                          "4294967296", "-1", "neg 1" };

      foreach (string value in values)
      {
         Console.Write("{0,-20} -->", value);
         try {
            Console.WriteLine("{0,20}", Convert.ToUInt32(value, provider));
         }
         catch (FormatException) {
            Console.WriteLine("{0,20}", "Bad Format");
         }
         catch (OverflowException) {
            Console.WriteLine("{0,20}", "Numeric Overflow");
         }
      }
   }
}
// The example displays the following output:
//       123456789            -->           123456789
//       +123456789           -->          Bad Format
//       pos 123456789        -->           123456789
//       123456789.           -->          Bad Format
//       123,456,789          -->          Bad Format
//       4294967295           -->          4294967295
//       4294967296           -->    Numeric Overflow
//       -1                   -->          Bad Format
//       neg 1                -->    Numeric Overflow
open System
open System.Globalization

// Create a NumberFormatInfo object and set several of its
// properties that apply to numbers.
let provider = NumberFormatInfo()
provider.PositiveSign <- "pos "
provider.NegativeSign <- "neg "

// Define an array of numeric strings.
let values =
    [| "123456789"; "+123456789"; "pos 123456789"
       "123456789."; "123,456,789"; "4294967295"
       "4294967296"; "-1"; "neg 1" |]

for value in values do
    printf $"{value,-20} -->"
    
    try
        printfn $"{Convert.ToUInt32(value, provider),20}"
    with
    | :? FormatException ->
        printfn "%20s" "Bad Format"
    | :? OverflowException ->
        printfn "%20s" "Numeric Overflow"
// The example displays the following output:
//       123456789            -->           123456789
//       +123456789           -->          Bad Format
//       pos 123456789        -->           123456789
//       123456789.           -->          Bad Format
//       123,456,789          -->          Bad Format
//       4294967295           -->          4294967295
//       4294967296           -->    Numeric Overflow
//       -1                   -->          Bad Format
//       neg 1                -->    Numeric Overflow
Imports System.Globalization

Module Example
   Public Sub Main()
      ' Create a NumberFormatInfo object and set several of its
      ' properties that apply to numbers.
      Dim provider As New NumberFormatInfo() 
      provider.PositiveSign = "pos "
      provider.NegativeSign = "neg "

      ' Define an array of numeric strings.
      Dim values() As String = { "123456789", "+123456789", "pos 123456789", _
                                 "123456789.", "123,456,789",  "4294967295", _
                                 "4294967296", "-1", "neg 1" }

      For Each value As String In values
         Console.Write("{0,-20} -->", value)
         Try
            Console.WriteLine("{0,20}", Convert.ToUInt32(value, provider))
         Catch e As FormatException
            Console.WriteLine("{0,20}", "Bad Format")
         Catch e As OverflowException
            Console.WriteLine("{0,20}", "Numeric Overflow")
         End Try   
      Next
    End Sub 
End Module 
' The example displays the following output:
'       123456789            -->           123456789
'       +123456789           -->          Bad Format
'       pos 123456789        -->           123456789
'       123456789.           -->          Bad Format
'       123,456,789          -->          Bad Format
'       4294967295           -->          4294967295
'       4294967296           -->    Numeric Overflow
'       -1                   -->          Bad Format
'       neg 1                -->    Numeric Overflow

Hinweise

Der Rückgabewert ist das Ergebnis des Aufrufens UInt32.Parse von value.

providerist eine IFormatProvider instance, die ein NumberFormatInfo -Objekt abruft. Das NumberFormatInfo -Objekt stellt kulturspezifische Informationen zum Format von bereit value. Wenn provider ist null, wird der NumberFormatInfo für die aktuelle Kultur verwendet.

Wenn Sie es vorziehen, keine Ausnahme zu behandeln, wenn die Konvertierung fehlschlägt, können Sie stattdessen die UInt32.TryParse -Methode aufrufen. Es gibt einen Boolean Wert zurück, der angibt, ob die Konvertierung erfolgreich war oder fehlgeschlagen ist.

Gilt für:

ToUInt32(String, Int32)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert die Zeichenfolgendarstellung einer Zahl in einer angegebenen Basis in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::String ^ value, int fromBase);
[System.CLSCompliant(false)]
public static uint ToUInt32 (string value, int fromBase);
[System.CLSCompliant(false)]
public static uint ToUInt32 (string? value, int fromBase);
[<System.CLSCompliant(false)>]
static member ToUInt32 : string * int -> uint32
Public Shared Function ToUInt32 (value As String, fromBase As Integer) As UInteger

Parameter

value
String

Eine Zeichenfolge, die die zu konvertierende Zahl enthält.

fromBase
Int32

Die Basis der Zahl in value, die 2, 8, 10 oder 16 sein muss.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die der Zahl in value entspricht, oder 0 (null), wenn value gleich null ist.

Attribute

Ausnahmen

fromBase ist nicht 2, 8, 10 oder 16.

- oder -

value, der eine nicht zur Basis 10 gehörende Zahl ohne Vorzeichen darstellt, weist ein negatives Vorzeichen als Präfix auf.

value enthält ein Zeichen, das in der von fromBase angegebenen Basis keine gültige Ziffer ist. Die Ausnahmemeldung gibt an, dass keine zu konvertierenden Ziffern vorhanden sind, wenn das erste Zeichen in value ungültig ist. Andernfalls gibt die Meldung an, dass value ungültige nachfolgende Zeichen enthält.

value, der eine nicht zur Basis 10 gehörende Zahl ohne Vorzeichen darstellt, weist ein negatives Vorzeichen als Präfix auf.

- oder -

value stellt eine Zahl dar, die kleiner als UInt32.MinValue oder größer als UInt32.MaxValue ist.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Array numerischer Zeichenfolgen als Hexadezimalwert zu interpretieren und in eine ganze Zahl ohne Vorzeichen zu konvertieren.

using System;

public class Example
{
   public static void Main()
   {
      string[] hexStrings = { "80000000", "0FFFFFFF", "F0000000", "00A3000", "D",
                              "-13", "9AC61", "GAD", "FFFFFFFFFF" };

      foreach (string hexString in hexStrings)
      {
         Console.Write("{0,-12}  -->  ", hexString);
         try {
            uint number = Convert.ToUInt32(hexString, 16);
            Console.WriteLine("{0,18:N0}", number);
         }
         catch (FormatException) {
            Console.WriteLine("{0,18}", "Bad Format");
         }
         catch (OverflowException)
         {
            Console.WriteLine("{0,18}", "Numeric Overflow");
         }
         catch (ArgumentException) {
            Console.WriteLine("{0,18}", "Invalid in Base 16");
         }
      }
   }
}
// The example displays the following output:
//       80000000      -->       2,147,483,648
//       0FFFFFFF      -->         268,435,455
//       F0000000      -->       4,026,531,840
//       00A3000       -->             667,648
//       D             -->                  13
//       -13           -->  Invalid in Base 16
//       9AC61         -->             633,953
//       GAD           -->          Bad Format
//       FFFFFFFFFF    -->    Numeric Overflow
open System

let hexStrings =
    [| "80000000"; "0FFFFFFF"; "F0000000"; "00A3000"
       "D"; "-13"; "9AC61"; "GAD"; "FFFFFFFFFF" |]

for hexString in hexStrings do
    printf $"{hexString,-12}  -->  "
    try
        let number = Convert.ToUInt32(hexString, 16)
        printfn $"{number,18:N0}"
    with
    | :? FormatException ->
        printfn "%18s" "Bad Format"
    | :? OverflowException ->
        printfn "%18s" "Numeric Overflow"
    | :? ArgumentException ->
        printfn "%18s" "Invalid in Base 16"
// The example displays the following output:
//       80000000      -->       2,147,483,648
//       0FFFFFFF      -->         268,435,455
//       F0000000      -->       4,026,531,840
//       00A3000       -->             667,648
//       D             -->                  13
//       -13           -->  Invalid in Base 16
//       9AC61         -->             633,953
//       GAD           -->          Bad Format
//       FFFFFFFFFF    -->    Numeric Overflow
Module Example
   Public Sub Main()
      Dim hexStrings() As String = { "80000000", "0FFFFFFF", "F0000000", "00A3000", "D", _
                                     "-13", "9AC61", "GAD", "FFFFFFFFFF" }
      For Each hexString As String In hexStrings
         Console.Write("{0,-12}  -->  ", hexString)
         Try
            Dim number As UInteger = Convert.ToUInt32(hexString, 16)
            Console.WriteLine("{0,18:N0}", number)
         Catch e As FormatException
            Console.WriteLine("{0,18}", "Bad Format")
         Catch e As OverflowException
            Console.WriteLine("{0,18}", "Numeric Overflow")
         Catch e As ArgumentException
            Console.WriteLine("{0,18}", "Invalid in Base 16")
         End Try
      Next                                            
   End Sub
End Module
'    ' The example displays the following output:
'    80000000      -->       2,147,483,648
'    0FFFFFFF      -->         268,435,455
'    F0000000      -->       4,026,531,840
'    00A3000       -->             667,648
'    D             -->                  13
'    -13           -->  Invalid in Base 16
'    9AC61         -->             633,953
'    GAD           -->          Bad Format
'    FFFFFFFFFF    -->    Numeric Overflow

Hinweise

Wenn fromBase 16 ist, können Sie der vom value Parameter angegebenen Zahl "0x" oder "0X" voranstellen.

Da der UInt32 Datentyp nur werte ohne Vorzeichen unterstützt, geht die ToUInt32(String, Int32) -Methode davon aus, dass diese value mithilfe einer binären Darstellung ohne Vorzeichen ausgedrückt wird. Anders ausgedrückt: Alle 32 Bits werden verwendet, um den numerischen Wert darzustellen, und ein Zeichenbit fehlt. Daher ist es möglich, Code zu schreiben, in dem ein ganzzahliger Vorzeichenwert außerhalb des Bereichs des UInt32 Datentyps in einen UInt32 Wert konvertiert wird, ohne dass die Methode eine Ausnahme auslöst. Im folgenden Beispiel wird in die hexadezimale Zeichenfolgendarstellung MinValue konvertiert und dann die ToUInt32(String, Int32) -Methode aufgerufen. Anstatt eine Ausnahme auszulösen, zeigt die -Methode die Meldung "0x80000000 konvertiert in 2147483648" an.

// Create a hexadecimal value out of range of the UInt32 type.
string value = Convert.ToString(Int32.MinValue, 16);
// Convert it back to a number.
try
{
   UInt32 number = Convert.ToUInt32(value, 16);
   Console.WriteLine("0x{0} converts to {1}.", value, number);
}
catch (OverflowException)
{
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned integer.",
                     value);
}
// Create a hexadecimal value out of range of the UInt32 type.
let value = Convert.ToString(Int32.MinValue, 16)
// Convert it back to a number.
try
    let number = Convert.ToUInt32(value, 16)
    printfn $"0x{value} converts to {number}."
with :? OverflowException ->
    printfn $"Unable to convert '0x{value}' to an unsigned integer."
' Create a hexadecimal value out of range of the UInt32 type.
Dim value As String = Convert.ToString(Integer.MinValue, 16)
' Convert it back to a number.
Try
   Dim number As UInt32 = Convert.ToUInt32(value, 16)
   Console.WriteLine("0x{0} converts to {1}.", value, number)
Catch e As OverflowException
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned integer.", _
                     value)
End Try

Beim Ausführen von binären Vorgängen oder numerischen Konvertierungen liegt es immer in der Verantwortung des Entwicklers, zu überprüfen, ob eine Methode oder ein Operator die entsprechende numerische Darstellung verwendet, um einen bestimmten Wert zu interpretieren. Im folgenden Beispiel wird ein Verfahren veranschaulicht, mit dem sichergestellt wird, dass die Methode beim Konvertieren einer hexadezimalen Zeichenfolge in einen UInt32 Wert nicht unangemessen eine binäre Darstellung verwendet, um einen Wert zu interpretieren, der die Komplementdarstellung von zwei verwendet. Im Beispiel wird bestimmt, ob ein Wert eine ganze Zahl ohne Vorzeichen oder eine ganze Zahl ohne Vorzeichen darstellt, während dieser Wert in seine Zeichenfolgendarstellung konvertiert wird. Wenn im Beispiel der Wert in einen UInt32 Wert konvertiert wird, wird überprüft, ob der ursprüngliche Wert eine ganze Zahl mit Vorzeichen war. Wenn dies der Grund ist, und wenn das Bit mit hoher Reihenfolge festgelegt ist (was angibt, dass der ursprüngliche Wert negativ war), löst die Methode eine Ausnahme aus.

// Create a negative hexadecimal value out of range of the UInt32 type.
int sourceNumber = Int32.MinValue;
bool isSigned = Math.Sign((int)sourceNumber.GetType().GetField("MinValue").GetValue(null)) == -1;
string value = Convert.ToString(sourceNumber, 16);
UInt32 targetNumber;
try
{
   targetNumber = Convert.ToUInt32(value, 16);
   if (isSigned && ((targetNumber & 0x80000000) != 0))
      throw new OverflowException();
   else
      Console.WriteLine("0x{0} converts to {1}.", value, targetNumber);
}
catch (OverflowException)
{
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned integer.",
                     value);
}
// Displays the following to the console:
//    Unable to convert '0x80000000' to an unsigned integer.
// Create a negative hexadecimal value out of range of the UInt32 type.
let sourceNumber = Int32.MinValue
let isSigned = sign (sourceNumber.GetType().GetField("MinValue").GetValue null :?> int) = -1
let value = Convert.ToString(sourceNumber, 16)
try
    let targetNumber = Convert.ToUInt32(value, 16)
    if isSigned && targetNumber &&& 0x80000000u <> 0u then
        raise (OverflowException())
    else
        printfn $"0x{value} converts to {targetNumber}."
with :? OverflowException ->
    printfn $"Unable to convert '0x{value}' to an unsigned integer."
// Displays the following to the console:
//    Unable to convert '0x80000000' to an unsigned integer.
' Create a negative hexadecimal value out of range of the UInt32 type.
Dim sourceNumber As Integer = Integer.MinValue
Dim isSigned As Boolean = Math.Sign(sourceNumber.MinValue) = -1
Dim value As String = Convert.ToString(sourceNumber, 16)
Dim targetNumber As UInt32
Try
   targetNumber = Convert.ToUInt32(value, 16)
   If isSigned And ((targetNumber And &H80000000) <> 0) Then
      Throw New OverflowException()
   Else 
      Console.WriteLine("0x{0} converts to {1}.", value, targetNumber)
   End If    
Catch e As OverflowException
   Console.WriteLine("Unable to convert '0x{0}' to an unsigned integer.", _
                     value)
End Try 
' Displays the following to the console:
'    Unable to convert '0x80000000' to an unsigned integer.

Gilt für:

ToUInt32(Single)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen Gleitkommazahl mit einfacher Genauigkeit in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(float value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (float value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : single -> uint32
Public Shared Function ToUInt32 (value As Single) As UInteger

Parameter

value
Single

Die zu konvertierende Gleitkommazahl mit einfacher Genauigkeit.

Gibt zurück

value, auf die nächste 32-Bit-Ganzzahl ohne Vorzeichen gerundet. Wenn value genau zwischen zwei ganzen Zahlen liegt, wird die gerade Zahl zurückgegeben (d. h. 4,5 wird in 4 und 5,5 in 6 konvertiert).

Attribute

Ausnahmen

value ist kleiner als 0 (null) oder größer als UInt32.MaxValue.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Array von Single Werten in eine ganze Zahl ohne Vorzeichen zu konvertieren.

float[] values= { Single.MinValue, -1.38e10f, -1023.299f, -12.98f,
                  0f, 9.113e-16f, 103.919f, 17834.191f, Single.MaxValue };
uint result;

foreach (float value in values)
{
   try {
      result = Convert.ToUInt32(value);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//    The Single value -3.402823E+38 is outside the range of the UInt32 type.
//    The Single value -1.38E+10 is outside the range of the UInt32 type.
//    The Single value -1023.299 is outside the range of the UInt32 type.
//    The Single value -12.98 is outside the range of the UInt32 type.
//    Converted the Single value 0 to the UInt32 value 0.
//    Converted the Single value 9.113E-16 to the UInt32 value 0.
//    Converted the Single value 103.919 to the UInt32 value 104.
//    Converted the Single value 17834.19 to the UInt32 value 17834.
//    The Single value 3.402823E+38 is outside the range of the UInt32 type.
let numbers = 
    [| Single.MinValue; -1.38e10f; -1023.299f; -12.98f
       0f; 9.113e-16f; 103.919f; 17834.191f; Single.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"{number} is outside the range of the UInt32 type."
// The example displays the following output:
//    -3.402823E+38 is outside the range of the UInt32 type.
//    -1.38E+10 is outside the range of the UInt32 type.
//    -1023.299 is outside the range of the UInt32 type.
//    -12.98 is outside the range of the UInt32 type.
//    Converted the Single value '0' to the UInt32 value 0.
//    Converted the Single value '9.113E-16' to the UInt32 value 0.
//    Converted the Single value '103.919' to the UInt32 value 104.
//    Converted the Single value '17834.19' to the UInt32 value 17834.
//    3.402823E+38 is outside the range of the UInt32 type.
Dim values() As Single = { Single.MinValue, -1.38e10, -1023.299, -12.98, _
                           0, 9.113e-16, 103.919, 17834.191, Single.MaxValue }
Dim result As UInteger

For Each value As Single In values
   Try
      result = Convert.ToUInt32(value)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        value.GetType().Name, value, result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        value.GetType().Name, value)
   End Try
Next
' The example displays the following output:
'    The Single value -3.402823E+38 is outside the range of the UInt32 type.
'    The Single value -1.38E+10 is outside the range of the UInt32 type.
'    The Single value -1023.299 is outside the range of the UInt32 type.
'    The Single value -12.98 is outside the range of the UInt32 type.
'    Converted the Single value 0 to the UInt32 value 0.
'    Converted the Single value 9.113E-16 to the UInt32 value 0.
'    Converted the Single value 103.919 to the UInt32 value 104.
'    Converted the Single value 17834.19 to the UInt32 value 17834.
'    The Single value 3.402823E+38 is outside the range of the UInt32 type.

Weitere Informationen

Gilt für:

ToUInt32(Object, IFormatProvider)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert des angegebenen Objekts unter Verwendung der angegebenen kulturspezifischen Formatierungsinformationen in eine 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::Object ^ value, IFormatProvider ^ provider);
[System.CLSCompliant(false)]
public static uint ToUInt32 (object value, IFormatProvider provider);
[System.CLSCompliant(false)]
public static uint ToUInt32 (object? value, IFormatProvider? provider);
[<System.CLSCompliant(false)>]
static member ToUInt32 : obj * IFormatProvider -> uint32
Public Shared Function ToUInt32 (value As Object, provider As IFormatProvider) As UInteger

Parameter

value
Object

Ein Objekt, das die IConvertible-Schnittstelle implementiert.

provider
IFormatProvider

Ein Objekt, das kulturspezifische Formatierungsinformationen bereitstellt.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht, oder 0 (null), wenn value gleich null ist.

Attribute

Ausnahmen

value weist kein geeignetes Format auf.

Die IConvertible-Schnittstelle wird von value nicht implementiert.

- oder -

Die Konvertierung wird nicht unterstützt.

value stellt eine Zahl dar, die kleiner als UInt32.MinValue oder größer als UInt32.MaxValue ist.

Beispiele

Im folgenden Beispiel wird eine HexString Klasse definiert, die die IConvertible -Schnittstelle implementiert und für die Zeichenfolgendarstellung sowohl von 32-Bit-Werten mit Vorzeichen als auch von 32-Bit-Werten ohne Vorzeichen konzipiert ist. Die -Klasse enthält eine Sign -Eigenschaft, die das Vorzeichen ihres Hexadezimalwerts angibt.

using System;
using System.Globalization;
using System.Text.RegularExpressions;

public enum SignBit { Negative=-1, Zero=0, Positive=1 };

public struct HexString : IConvertible
{
   private SignBit signBit;
   private string hexString;

   public SignBit Sign
   {
      set { signBit = value; }
      get { return signBit; }
   }

   public string Value
   {
      set {
         if (value.Trim().Length > 8)
            throw new ArgumentException("The string representation of a 32-bit integer cannot have more than 8 characters.");
         else if (! Regex.IsMatch(value, "([0-9,A-F]){1,8}", RegexOptions.IgnoreCase))
            throw new ArgumentException("The hexadecimal representation of a 32-bit integer contains invalid characters.");
         else
            hexString = value;
      }
      get { return hexString; }
   }

   // IConvertible implementations.
   public TypeCode GetTypeCode()
   {
      return TypeCode.Object;
   }

   public bool ToBoolean(IFormatProvider provider)
   {
      return signBit != SignBit.Zero;
   }

   public byte ToByte(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToInt32(hexString, 16)));
      else
         try {
            return Byte.Parse(hexString, NumberStyles.HexNumber);
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToUInt32(hexString, 16)), e);
         }
   }

   public char ToChar(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToInt32(hexString, 16)));

      try {
         ushort codePoint = UInt16.Parse(this.hexString, NumberStyles.HexNumber);
         return Convert.ToChar(codePoint);
      }
      catch (OverflowException e) {
         throw new OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToUInt32(hexString, 16)), e);
      }
   }

   public DateTime ToDateTime(IFormatProvider provider)
   {
      throw new InvalidCastException("Hexadecimal to DateTime conversion is not supported.");
   }

   public decimal ToDecimal(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
      {
         int hexValue = Int32.Parse(hexString, NumberStyles.HexNumber);
         return Convert.ToDecimal(hexValue);
      }
      else
      {
         uint hexValue = UInt32.Parse(hexString, NumberStyles.HexNumber);
         return Convert.ToDecimal(hexValue);
      }
   }

   public double ToDouble(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToDouble(Int32.Parse(hexString, NumberStyles.HexNumber));
      else
         return Convert.ToDouble(UInt32.Parse(hexString, NumberStyles.HexNumber));
   }

   public short ToInt16(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         try {
            return Convert.ToInt16(Int32.Parse(hexString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is out of range of the Int16 type.", Convert.ToInt32(hexString, 16)), e);
         }
      else
         try {
            return Convert.ToInt16(UInt32.Parse(hexString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is out of range of the Int16 type.", Convert.ToUInt32(hexString, 16)), e);
         }
   }

   public int ToInt32(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Int32.Parse(hexString, NumberStyles.HexNumber);
      else
         try {
            return Convert.ToInt32(UInt32.Parse(hexString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is out of range of the Int32 type.", Convert.ToUInt32(hexString, 16)), e);
         }
   }

   public long ToInt64(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToInt64(Int32.Parse(hexString, NumberStyles.HexNumber));
      else
         return Int64.Parse(hexString, NumberStyles.HexNumber);
   }

   public sbyte ToSByte(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         try {
            return Convert.ToSByte(Int32.Parse(hexString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is outside the range of the SByte type.",
                                                      Int32.Parse(hexString, NumberStyles.HexNumber), e));
         }
      else
         try {
            return Convert.ToSByte(UInt32.Parse(hexString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is outside the range of the SByte type.",
                                                    UInt32.Parse(hexString, NumberStyles.HexNumber)), e);
         }
   }

   public float ToSingle(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         return Convert.ToSingle(Int32.Parse(hexString, NumberStyles.HexNumber));
      else
         return Convert.ToSingle(UInt32.Parse(hexString, NumberStyles.HexNumber));
   }

   public string ToString(IFormatProvider provider)
   {
      return "0x" + this.hexString;
   }

   public object ToType(Type conversionType, IFormatProvider provider)
   {
      switch (Type.GetTypeCode(conversionType))
      {
         case TypeCode.Boolean:
            return this.ToBoolean(null);
         case TypeCode.Byte:
            return this.ToByte(null);
         case TypeCode.Char:
            return this.ToChar(null);
         case TypeCode.DateTime:
            return this.ToDateTime(null);
         case TypeCode.Decimal:
            return this.ToDecimal(null);
         case TypeCode.Double:
            return this.ToDouble(null);
         case TypeCode.Int16:
            return this.ToInt16(null);
         case TypeCode.Int32:
            return this.ToInt32(null);
         case TypeCode.Int64:
            return this.ToInt64(null);
         case TypeCode.Object:
            if (typeof(HexString).Equals(conversionType))
               return this;
            else
               throw new InvalidCastException(String.Format("Conversion to a {0} is not supported.", conversionType.Name));
         case TypeCode.SByte:
            return this.ToSByte(null);
         case TypeCode.Single:
            return this.ToSingle(null);
         case TypeCode.String:
            return this.ToString(null);
         case TypeCode.UInt16:
            return this.ToUInt16(null);
         case TypeCode.UInt32:
            return this.ToUInt32(null);
         case TypeCode.UInt64:
            return this.ToUInt64(null);
         default:
            throw new InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name));
      }
   }

   public ushort ToUInt16(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt16 type.",
                                                   Int32.Parse(hexString, NumberStyles.HexNumber)));
      else
         try {
            return Convert.ToUInt16(UInt32.Parse(hexString, NumberStyles.HexNumber));
         }
         catch (OverflowException e) {
            throw new OverflowException(String.Format("{0} is out of range of the UInt16 type.", Convert.ToUInt32(hexString, 16)), e);
         }
   }

   public uint ToUInt32(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt32 type.",
                                                   Int32.Parse(hexString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt32(hexString, 16);
   }

   public ulong ToUInt64(IFormatProvider provider)
   {
      if (signBit == SignBit.Negative)
         throw new OverflowException(String.Format("{0} is outside the range of the UInt64 type.",
                                                   Int32.Parse(hexString, NumberStyles.HexNumber)));
      else
         return Convert.ToUInt64(hexString, 16);
   }
}
open System
open System.Globalization
open System.Text.RegularExpressions

type SignBit =
    | Negative = -1
    | Zero = 0
    | Positive = 1

[<Struct>]
type HexString =
    val mutable private hexString: string

    val mutable Sign: SignBit

    member this.Value
        with get () = this.hexString
        and set (value: string) =
            if value.Trim().Length > 8 then
                invalidArg "value" "The string representation of a 32 bit integer cannot have more than eight characters."
            elif Regex.IsMatch(value, "([0-9,A-F]){1,8}", RegexOptions.IgnoreCase) |> not then
                invalidArg "value" "The hexadecimal representation of a 32-bit integer contains invalid characters."
            else
                this.hexString <- value

    interface IConvertible with
        // IConvertible implementations.
        member _.GetTypeCode() =
            TypeCode.Object

        member this.ToBoolean(provider: IFormatProvider) =
            this.Sign <> SignBit.Zero

        member this.ToByte(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Convert.ToInt32(this.hexString, 16)} is out of range of the Byte type.")
            else
                try
                    Byte.Parse(this.hexString, NumberStyles.HexNumber)
                with :? OverflowException as e ->
                    raise (OverflowException($"{Convert.ToInt32(this.hexString, 16)} is out of range of the Byte type.", e) )

        member this.ToChar(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Convert.ToInt32(this.hexString, 16)} is out of range of the Char type.")

            try
                let codePoint = UInt16.Parse(this.hexString, NumberStyles.HexNumber)
                Convert.ToChar codePoint
            with :? OverflowException as e ->
                raise (OverflowException($"{Convert.ToInt32(this.hexString, 16)} is out of range of the Char type.", e) )

        member _.ToDateTime(provider: IFormatProvider) =
            raise (InvalidCastException "Hexadecimal to DateTime conversion is not supported.")

        member this.ToDecimal(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                let hexValue = Int32.Parse(this.hexString, NumberStyles.HexNumber)
                Convert.ToDecimal hexValue
            else
                let hexValue = UInt32.Parse(this.hexString, NumberStyles.HexNumber)
                Convert.ToDecimal hexValue

        member this.ToDouble(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToDouble(Int32.Parse(this.hexString, NumberStyles.HexNumber))
            else
                Convert.ToDouble(UInt32.Parse(this.hexString, NumberStyles.HexNumber))

        member this.ToInt16(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                try
                    Convert.ToInt16(Int32.Parse(this.hexString, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Convert.ToInt32(this.hexString, 16)} is out of range of the Int16 type.", e) )
            else
                try
                    Convert.ToInt16(UInt32.Parse(this.hexString, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Convert.ToInt32(this.hexString, 16)} is out of range of the Int16 type.", e) )

        member this.ToInt32(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Int32.Parse(this.hexString, NumberStyles.HexNumber)
            else
                try
                    Convert.ToInt32(UInt32.Parse(this.hexString, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Convert.ToInt32(this.hexString, 16)} is out of range of the Int32 type.", e) )

        member this.ToInt64(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToInt64(Int32.Parse(this.hexString, NumberStyles.HexNumber))
            else
                Int64.Parse(this.hexString, NumberStyles.HexNumber)

        member this.ToSByte(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                try
                    Convert.ToSByte(Int32.Parse(this.hexString, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Int32.Parse(this.hexString, NumberStyles.HexNumber)} is outside the range of the SByte type.", e) )
            else
                try
                    Convert.ToSByte(UInt32.Parse(this.hexString, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{UInt32.Parse(this.hexString, NumberStyles.HexNumber)} is outside the range of the SByte type.", e) )

        member this.ToSingle(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                Convert.ToSingle(Int32.Parse(this.hexString, NumberStyles.HexNumber))
            else
                Convert.ToSingle(UInt32.Parse(this.hexString, NumberStyles.HexNumber))

        member this.ToString(provider: IFormatProvider) =
            "0x" + this.hexString

        member this.ToType(conversionType: Type, provider: IFormatProvider) =
            let this = this :> IConvertible
            match Type.GetTypeCode conversionType with
            | TypeCode.Boolean ->
                this.ToBoolean null
            | TypeCode.Byte ->
                this.ToByte null
            | TypeCode.Char ->
                this.ToChar null
            | TypeCode.DateTime ->
                this.ToDateTime null
            | TypeCode.Decimal ->
                this.ToDecimal null
            | TypeCode.Double ->
                this.ToDouble null
            | TypeCode.Int16 ->
                this.ToInt16 null
            | TypeCode.Int32 ->
                this.ToInt32 null
            | TypeCode.Int64 ->
                this.ToInt64 null
            | TypeCode.Object ->
                if typeof<HexString>.Equals conversionType then
                    this
                else
                    raise (InvalidCastException $"Conversion to a {conversionType.Name} is not supported.")
            | TypeCode.SByte ->
                this.ToSByte null
            | TypeCode.Single ->
                this.ToSingle null
            | TypeCode.String ->
                this.ToString null
            | TypeCode.UInt16 ->
                this.ToUInt16 null
            | TypeCode.UInt32 ->
                this.ToUInt32 null
            | TypeCode.UInt64 ->
                this.ToUInt64 null
            | _ ->
                    raise (InvalidCastException $"Conversion to {conversionType.Name} is not supported.")

        member this.ToUInt16(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Int32.Parse(this.hexString, NumberStyles.HexNumber)} is outside the range of the UInt16 type.")
            else
                try
                    Convert.ToUInt16(UInt32.Parse(this.hexString, NumberStyles.HexNumber))
                with :? OverflowException as e ->
                    raise (OverflowException($"{Convert.ToInt32(this.hexString, 16)} is out of range of the UInt16 type.", e) )

        member this.ToUInt32(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Int32.Parse(this.hexString, NumberStyles.HexNumber)} is outside the range of the UInt32 type.")
            else
                Convert.ToUInt32(this.hexString, 16)

        member this.ToUInt64(provider: IFormatProvider) =
            if this.Sign = SignBit.Negative then
                raise (OverflowException $"{Int32.Parse(this.hexString, NumberStyles.HexNumber)} is outside the range of the UInt64 type.")
            else
                Convert.ToUInt64(this.hexString, 16)
Imports System.Globalization
Imports System.Text.RegularExpressions

Public Enum SignBit As Integer
   Positive = 1
   Zero = 0
   Negative = -1
End Enum

Public Structure HexString : Implements IConvertible
   Private signBit As SignBit
   Private hexString As String
   
   Public Property Sign As SignBit
      Set
         signBit = value
      End Set
      Get
         Return signBit
      End Get
   End Property
   
   Public Property Value As String
      Set
         If value.Trim().Length > 8 Then
            Throw New ArgumentException("The string representation of a 32-bit integer cannot have more than 8 characters.")
         Else If Not Regex.IsMatch(value, "([0-9,A-F]){1,8}", RegexOptions.IgnoreCase) Then
            Throw New ArgumentException("The hexadecimal representation of a 32-bit integer contains invalid characters.")             
         Else
            hexString = value
         End If   
      End Set
      Get
         Return hexString
      End Get
   End Property
   
   ' IConvertible implementations.
   Public Function GetTypeCode() As TypeCode _
                   Implements IConvertible.GetTypeCode
      Return TypeCode.Object
   End Function
   
   Public Function ToBoolean(provider As IFormatProvider) As Boolean _
                   Implements IConvertible.ToBoolean
      Return signBit <> SignBit.Zero
   End Function 
   
   Public Function ToByte(provider As IFormatProvider) As Byte _
                   Implements IConvertible.ToByte
      If signBit = SignBit.Negative Then
         Throw New OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToInt32(hexString, 16))) 
      Else
         Try
            Return Byte.Parse(hexString, NumberStyles.HexNumber)
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is out of range of the Byte type.", Convert.ToUInt32(hexString, 16)), e)
         End Try   
      End If       
   End Function
   
   Public Function ToChar(provider As IFormatProvider) As Char _
                   Implements IConvertible.ToChar
      If signBit = SignBit.Negative Then 
         Throw New OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToInt32(hexString, 16)))
      End If
      
      Try
         Dim codePoint As UInt16 = UInt16.Parse(Me.hexString, NumberStyles.HexNumber)
         Return Convert.ToChar(codePoint)
      Catch e As OverflowException
         Throw New OverflowException(String.Format("{0} is out of range of the Char type.", Convert.ToUInt32(hexString, 16)))
      End Try      
   End Function 
   
   Public Function ToDateTime(provider As IFormatProvider) As Date _
                   Implements IConvertible.ToDateTime
      Throw New InvalidCastException("Hexadecimal to DateTime conversion is not supported.")
   End Function
   
   Public Function ToDecimal(provider As IFormatProvider) As Decimal _
                   Implements IConvertible.ToDecimal
      If signBit = SignBit.Negative Then
         Dim hexValue As Integer = Int32.Parse(hexString, NumberStyles.HexNumber)
         Return Convert.ToDecimal(hexValue)
      Else
         Dim hexValue As UInteger = UInt32.Parse(hexString, NumberStyles.HexNumber)
         Return Convert.ToDecimal(hexValue)
      End If
   End Function
   
   Public Function ToDouble(provider As IFormatProvider) As Double _
                   Implements IConvertible.ToDouble
      If signBit = SignBit.Negative Then
         Return Convert.ToDouble(Int32.Parse(hexString, NumberStyles.HexNumber))
      Else
         Return Convert.ToDouble(UInt32.Parse(hexString, NumberStyles.HexNumber))
      End If   
   End Function   
   
   Public Function ToInt16(provider As IFormatProvider) As Int16 _
                   Implements IConvertible.ToInt16
      If signBit = SignBit.Negative Then
         Try
            Return Convert.ToInt16(Int32.Parse(hexString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is out of range of the Int16 type.", Convert.ToInt32(hexString, 16)), e)
         End Try
      Else
         Try
            Return Convert.ToInt16(UInt32.Parse(hexString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is out of range of the Int16 type.", Convert.ToUInt32(hexString, 16)), e)
         End Try
      End If   
   End Function
   
   Public Function ToInt32(provider As IFormatProvider) As Int32 _
                   Implements IConvertible.ToInt32
      If signBit = SignBit.Negative Then
         Return Int32.Parse(hexString, NumberStyles.HexNumber)
      Else
         Try
            Return Convert.ToInt32(UInt32.Parse(hexString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is out of range of the Int32 type.", Convert.ToUInt32(hexString, 16)), e)
         End Try   
      End If   
   End Function
   
   Public Function ToInt64(provider As IFormatProvider) As Int64 _
                   Implements IConvertible.ToInt64
      If signBit = SignBit.Negative Then
         Return Convert.ToInt64(Int32.Parse(hexString, NumberStyles.HexNumber))
      Else
         Return Int64.Parse(hexString, NumberStyles.HexNumber)
      End If   
   End Function
   
   Public Function ToSByte(provider As IFormatProvider) As SByte _
                   Implements IConvertible.ToSByte
      If signBit = SignBit.Negative Then
         Try
            Return Convert.ToSByte(Int32.Parse(hexString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is outside the range of the SByte type.", _
                                                      Int32.Parse(hexString, NumberStyles.HexNumber), e))
         End Try
      Else
         Try
            Return Convert.ToSByte(UInt32.Parse(hexString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is outside the range of the SByte type.", _
                                                    UInt32.Parse(hexString, NumberStyles.HexNumber)), e)
         End Try   
      End If
   End Function

   Public Function ToSingle(provider As IFormatProvider) As Single _
                   Implements IConvertible.ToSingle
      If signBit = SignBit.Negative Then
         Return Convert.ToSingle(Int32.Parse(hexString, NumberStyles.HexNumber))
      Else
         Return Convert.ToSingle(UInt32.Parse(hexString, NumberStyles.HexNumber))
      End If   
   End Function

   Public Overloads Function ToString(provider As IFormatProvider) As String _
                   Implements IConvertible.ToString
      Return "0x" & Me.hexString
   End Function
   
   Public Function ToType(conversionType As Type, provider As IFormatProvider) As Object _
                   Implements IConvertible.ToType
      Select Case Type.GetTypeCode(conversionType)
         Case TypeCode.Boolean 
            Return Me.ToBoolean(Nothing)
         Case TypeCode.Byte
            Return Me.ToByte(Nothing)
         Case TypeCode.Char
            Return Me.ToChar(Nothing)
         Case TypeCode.DateTime
            Return Me.ToDateTime(Nothing)
         Case TypeCode.Decimal
            Return Me.ToDecimal(Nothing)
         Case TypeCode.Double
            Return Me.ToDouble(Nothing)
         Case TypeCode.Int16
            Return Me.ToInt16(Nothing)
         Case TypeCode.Int32
            Return Me.ToInt32(Nothing)
         Case TypeCode.Int64
            Return Me.ToInt64(Nothing)
         Case TypeCode.Object
            If GetType(HexString).Equals(conversionType) Then
               Return Me
            Else
               Throw New InvalidCastException(String.Format("Conversion to a {0} is not supported.", conversionType.Name))
            End If 
         Case TypeCode.SByte
            Return Me.ToSByte(Nothing)
         Case TypeCode.Single
            Return Me.ToSingle(Nothing)
         Case TypeCode.String
            Return Me.ToString(Nothing)
         Case TypeCode.UInt16
            Return Me.ToUInt16(Nothing)
         Case TypeCode.UInt32
            Return Me.ToUInt32(Nothing)
         Case TypeCode.UInt64
            Return Me.ToUInt64(Nothing)   
         Case Else
            Throw New InvalidCastException(String.Format("Conversion to {0} is not supported.", conversionType.Name))   
      End Select
   End Function
   
   Public Function ToUInt16(provider As IFormatProvider) As UInt16 _
                   Implements IConvertible.ToUInt16
      If signBit = SignBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt16 type.", _
                                                   Int32.Parse(hexString, NumberStyles.HexNumber)))
      Else
         Try
            Return Convert.ToUInt16(UInt32.Parse(hexString, NumberStyles.HexNumber))
         Catch e As OverflowException
            Throw New OverflowException(String.Format("{0} is out of range of the UInt16 type.", Convert.ToUInt32(hexString, 16)), e)
         End Try            
      End If   
   End Function

   Public Function ToUInt32(provider As IFormatProvider) As UInt32 _
                   Implements IConvertible.ToUInt32
      If signBit = SignBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt32 type.", _
                                                   Int32.Parse(hexString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt32(hexString, 16)
      End If   
   End Function
   
   Public Function ToUInt64(provider As IFormatProvider) As UInt64 _
                   Implements IConvertible.ToUInt64
      If signBit = SignBit.Negative Then
         Throw New OverflowException(String.Format("{0} is outside the range of the UInt64 type.", _
                                                   Int32.Parse(hexString, NumberStyles.HexNumber)))
      Else
         Return Convert.ToUInt64(hexString, 16)
      End If   
   End Function
   
End Structure

Das folgende Beispiel zeigt, dass ein Aufruf der -Methode, die ToUInt32(Object, IFormatProvider) ein HexString Objekt als Parameter übergibt, wiederum die IConvertible.ToUInt32 Implementierung der HexString -Klasse aufruft.

public class Example
{
   public static void Main()
   {
      uint positiveValue = 320000000;
      int negativeValue = -1;

      HexString positiveString = new HexString();
      positiveString.Sign = (SignBit) Math.Sign(positiveValue);
      positiveString.Value = positiveValue.ToString("X4");

      HexString negativeString = new HexString();
      negativeString.Sign = (SignBit) Math.Sign(negativeValue);
      negativeString.Value = negativeValue.ToString("X4");

      try {
         Console.WriteLine("0x{0} converts to {1}.", positiveString.Value, Convert.ToUInt32(positiveString));
      }
      catch (OverflowException) {
         Console.WriteLine("{0} is outside the range of the UInt32 type.",
                           Int32.Parse(positiveString.Value, NumberStyles.HexNumber));
      }

      try {
         Console.WriteLine("0x{0} converts to {1}.", negativeString.Value, Convert.ToUInt32(negativeString));
      }
      catch (OverflowException) {
         Console.WriteLine("{0} is outside the range of the UInt32 type.",
                           Int32.Parse(negativeString.Value, NumberStyles.HexNumber));
      }
   }
}
// The example dosplays the following output:
//       0x1312D000 converts to 320000000.
//       -1 is outside the range of the UInt32 type.
let positiveValue = 320000000u
let negativeValue = -1

let mutable positiveString = HexString()
positiveString.Sign <- Math.Sign positiveValue |> enum
positiveString.Value <- positiveValue.ToString "X4"

let mutable negativeString = HexString()
negativeString.Sign <- sign negativeValue |> enum
negativeString.Value <- negativeValue.ToString "X4"

try
    printfn $"0x{positiveString.Value} converts to {Convert.ToUInt32 positiveString}."
with :? OverflowException ->
    printfn $"{Int32.Parse(positiveString.Value, NumberStyles.HexNumber)} is outside the range of the UInt32 type."

try
    printfn $"0x{negativeString.Value} converts to {Convert.ToUInt32 negativeString}."
with :? OverflowException ->
    printfn $"{Int32.Parse(negativeString.Value, NumberStyles.HexNumber)} is outside the range of the UInt32 type."
// The example dosplays the following output:
//       0x1312D000 converts to 320000000.
//       -1 is outside the range of the UInt32 type.
Module Example
   Public Sub Main()
      Dim positiveValue As UInt32 = 320000000
      Dim negativeValue As Int32 = -1
      
      
      Dim positiveString As New HexString()
      positiveString.Sign = CType(Math.Sign(positiveValue), SignBit)
      positiveString.Value = positiveValue.ToString("X4")
      
      Dim negativeString As New HexString()
      negativeString.Sign = CType(Math.Sign(negativeValue), SignBit)
      negativeString.Value = negativeValue.ToString("X4")
      
      Try
         Console.WriteLine("0x{0} converts to {1}.", positiveString.Value, Convert.ToUInt32(positiveString))
      Catch e As OverflowException
         Console.WriteLine("{0} is outside the range of the UInt32 type.", _
                           Int32.Parse(positiveString.Value, NumberStyles.HexNumber))
      End Try

      Try
         Console.WriteLine("0x{0} converts to {1}.", negativeString.Value, Convert.ToUInt32(negativeString))
      Catch e As OverflowException
         Console.WriteLine("{0} is outside the range of the UInt32 type.", _
                           Int32.Parse(negativeString.Value, NumberStyles.HexNumber))
      End Try   
   End Sub
End Module
' The example dosplays the following output:
'       0x1312D000 converts to 320000000.
'       -1 is outside the range of the UInt32 type.

Hinweise

Der Rückgabewert ist das Ergebnis des Aufrufs der IConvertible.ToUInt32 -Methode des zugrunde liegenden Typs von value.

provider ermöglicht es dem Benutzer, kulturspezifische Konvertierungsinformationen zum Inhalt von valueanzugeben. Wenn beispielsweise eine String ist, value die eine Zahl darstellt, kann kulturspezifische Informationen über die Notation bereitstellen, provider die zur Darstellung dieser Zahl verwendet wird.

Die Basistypen ignorieren provider. Der Parameter kann jedoch verwendet werden, wenn es sich um value einen benutzerdefinierten Typ handelt, der die IConvertible Schnittstelle implementiert.

Gilt für:

ToUInt32(SByte)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl mit Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::SByte value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (sbyte value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : sbyte -> uint32
Public Shared Function ToUInt32 (value As SByte) As UInteger

Parameter

value
SByte

Die zu konvertierende 8-Bit-Ganzzahl mit Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Ausnahmen

value ist kleiner als Null.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Bytearray mit Vorzeichen in eine ganze Zahl ohne Vorzeichen zu konvertieren.

sbyte[] numbers = { SByte.MinValue, -1, 0, 10, SByte.MaxValue };
uint result;

foreach (sbyte number in numbers)
{
   try {
      result = Convert.ToUInt32(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//    The SByte value -128 is outside the range of the UInt32 type.
//    The SByte value -1 is outside the range of the UInt32 type.
//    Converted the SByte value 0 to the UInt32 value 0.
//    Converted the SByte value 10 to the UInt32 value 10.
//    Converted the SByte value 127 to the UInt32 value 127.
let numbers = [| SByte.MinValue; -1y; 0y; 10y; SByte.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"{number} is outside the range of the UInt32 type."
// The example displays the following output:
//    -128 is outside the range of the UInt32 type.
//    -1 is outside the range of the UInt32 type.
//    Converted the SByte value '0' to the UInt32 value 0.
//    Converted the SByte value '10' to the UInt32 value 10.
//    Converted the SByte value '127' to the UInt32 value 127.
Dim numbers() As SByte = { SByte.MinValue, -1, 0, 10, SByte.MaxValue }
Dim result As UInteger

For Each number As SByte In numbers
   Try
      result = Convert.ToUInt32(number)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'    The SByte value -128 is outside the range of the UInt32 type.
'    The SByte value -1 is outside the range of the UInt32 type.
'    Converted the SByte value 0 to the UInt32 value 0.
'    Converted the SByte value 10 to the UInt32 value 10.
'    Converted the SByte value 127 to the UInt32 value 127.

Gilt für:

ToUInt32(Char)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert des angegebenen Unicode-Zeichens in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(char value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (char value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : char -> uint32
Public Shared Function ToUInt32 (value As Char) As UInteger

Parameter

value
Char

Das zu konvertierende Unicode-Zeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Beispiele

Im folgenden Beispiel wird jedes Element in einem Zeichenarray in eine ganze Zahl ohne Vorzeichen konvertiert.

char[] chars = { 'a', 'z', '\u0007', '\u03FF',
                 '\u7FFF', '\uFFFE' };
uint result;

foreach (char ch in chars)
{
   result = Convert.ToUInt32(ch);
   Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.",
                     ch.GetType().Name, ch,
                     result.GetType().Name, result);
}
// The example displays the following output:
//    Converted the Char value 'a' to the UInt32 value 97.
//    Converted the Char value 'z' to the UInt32 value 122.
//    Converted the Char value '' to the UInt32 value 7.
//    Converted the Char value 'Ͽ' to the UInt32 value 1023.
//    Converted the Char value '翿' to the UInt32 value 32767.
//    Converted the Char value '' to the UInt32 value 65534.
let chars = 
    [| 'a'; 'z'; '\u0007'; '\u03FF'; '\u7FFF'; '\uFFFE' |]

for ch in chars do
    try
        let result = Convert.ToUInt16 ch
        printfn $"Converted the {ch.GetType().Name} value '{ch}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"Unable to convert u+{int ch:X4} to a UInt16."
// The example displays the following output:
//    Converted the Char value 'a' to the UInt32 value 97.
//    Converted the Char value 'z' to the UInt32 value 122.
//    Converted the Char value '' to the UInt32 value 7.
//    Converted the Char value '?' to the UInt32 value 1023.
//    Converted the Char value '?' to the UInt32 value 32767.
//    Converted the Char value '?' to the UInt32 value 65534.
Dim chars() As Char = { "a"c, "z"c, ChrW(7), ChrW(1023), _
                        ChrW(Short.MaxValue), ChrW(&hFFFE) }
Dim result As UInteger

For Each ch As Char in chars
   result = Convert.ToUInt32(ch)
   Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.", _
                     ch.GetType().Name, ch, _
                     result.GetType().Name, result)
Next
' The example displays the following output:
'    Converted the Char value 'a' to the UInt32 value 97.
'    Converted the Char value 'z' to the UInt32 value 122.
'    Converted the Char value '' to the UInt32 value 7.
'    Converted the Char value 'Ͽ' to the UInt32 value 1023.
'    Converted the Char value '翿' to the UInt32 value 32767.
'    Converted the Char value '' to the UInt32 value 65534.

Gilt für:

ToUInt32(Int64)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 64-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(long value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (long value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : int64 -> uint32
Public Shared Function ToUInt32 (value As Long) As UInteger

Parameter

value
Int64

Die zu konvertierende 64-Bit-Ganzzahl mit Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Ausnahmen

value ist kleiner als 0 (null) oder größer als UInt32.MaxValue.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Array mit langer Ganzzahl in eine ganze Zahl ohne Vorzeichen zu konvertieren.

long[] numbers = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue };
uint result;
foreach (long number in numbers)
{
   try {
      result = Convert.ToUInt32(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//    The Int64 value -9223372036854775808 is outside the range of the UInt32 type.
//    The Int64 value -1 is outside the range of the UInt32 type.
//    Converted the Int64 value 0 to the UInt32 value 0.
//    Converted the Int64 value 121 to the UInt32 value 121.
//    Converted the Int64 value 340 to the UInt32 value 340.
//    The Int64 value 9223372036854775807 is outside the range of the UInt32 type.
let numbers = [| Int64.MinValue; -1; 0; 121; 340; Int64.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn "The {number.GetType().Name} value {number} is outside the range of the UInt32 type."
// The example displays the following output:
//    The Int64 value -9223372036854775808 is outside the range of the UInt32 type.
//    The Int64 value -1 is outside the range of the UInt32 type.
//    Converted the Int64 value '0' to the UInt32 value 0.
//    Converted the Int64 value '121' to the UInt32 value 121.
//    Converted the Int64 value '340' to the UInt32 value 340.
//    The Int64 value 9223372036854775807 is outside the range of the UInt32 type.
Dim numbers() As Long = { Int64.MinValue, -1, 0, 121, 340, Int64.MaxValue }
Dim result As UInteger
For Each number As Long In numbers
   Try
      result = Convert.ToUInt32(number)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'    The Int64 value -9223372036854775808 is outside the range of the UInt32 type.
'    The Int64 value -1 is outside the range of the UInt32 type.
'    Converted the Int64 value 0 to the UInt32 value 0.
'    Converted the Int64 value 121 to the UInt32 value 121.
'    Converted the Int64 value 340 to the UInt32 value 340.
'    The Int64 value 9223372036854775807 is outside the range of the UInt32 type.

Gilt für:

ToUInt32(Int32)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 32-Bit-Ganzzahl mit Vorzeichen in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(int value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (int value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : int -> uint32
Public Shared Function ToUInt32 (value As Integer) As UInteger

Parameter

value
Int32

Die zu konvertierende 32-Bit-Ganzzahl mit Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Ausnahmen

value ist kleiner als Null.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Ganzzahlarray in eine ganze Zahl ohne Vorzeichen zu konvertieren.

int[] numbers = { Int32.MinValue, -1203, 0, 121, 1340, Int32.MaxValue };
uint result;
foreach (int number in numbers)
{
   try {
      result = Convert.ToUInt32(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        number.GetType().Name, number,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//    The Int32 value -2147483648 is outside the range of the UInt32 type.
//    The Int32 value -1203 is outside the range of the UInt32 type.
//    Converted the Int32 value 0 to the UInt32 value 0.
//    Converted the Int32 value 121 to the UInt32 value 121.
//    Converted the Int32 value 1340 to the UInt32 value 1340.
//    Converted the Int32 value 2147483647 to the UInt32 value 2147483647.
let numbers = [| Int32.MinValue; -1; 0; 121; 340; Int32.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn "The {number.GetType().Name} value {number} is outside the range of the UInt32 type."
                        
// The example displays the following output:
//    The Int32 value -2147483648 is outside the range of the UInt32 type.
//    The Int32 value -1 is outside the range of the UInt32 type.
//    Converted the Int32 value '0' to the UInt32 value 0.
//    Converted the Int32 value '121' to the UInt32 value 121.
//    Converted the Int32 value '340' to the UInt32 value 340.
//    The Int32 value 2147483647 is outside the range of the UInt32 type.
Dim numbers() As Integer = { Int32.MinValue, -1203, 0, 121, 1340, Int32.MaxValue }
Dim result As UInteger
For Each number As Integer In numbers
   Try
      result = Convert.ToUInt32(number)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        number.GetType().Name, number, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'    The Int32 value -2147483648 is outside the range of the UInt32 type.
'    The Int32 value -1203 is outside the range of the UInt32 type.
'    Converted the Int32 value 0 to the UInt32 value 0.
'    Converted the Int32 value 121 to the UInt32 value 121.
'    Converted the Int32 value 1340 to the UInt32 value 1340.
'    Converted the Int32 value 2147483647 to the UInt32 value 2147483647.

Gilt für:

ToUInt32(Int16)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 16-Bit-Ganzzahl mit Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(short value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (short value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : int16 -> uint32
Public Shared Function ToUInt32 (value As Short) As UInteger

Parameter

value
Int16

Die zu konvertierende 16-Bit-Ganzzahl mit Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Ausnahmen

value ist kleiner als Null.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem 16-Bit-Ganzzahlarray in eine ganze Zahl ohne Vorzeichen zu konvertieren.

short[] numbers= { Int16.MinValue, -1, 0, 121, 340, Int16.MaxValue };
uint result;

foreach (short number in numbers)
{
   try {
      result = Convert.ToUInt32(number);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                           number.GetType().Name, number,
                           result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        number.GetType().Name, number);
   }
}
// The example displays the following output:
//    The Int16 value -32768 is outside the range of the UInt32 type.
//    The Int16 value -1 is outside the range of the UInt32 type.
//    Converted the Int16 value 0 to the UInt32 value 0.
//    Converted the Int16 value 121 to the UInt32 value 121.
//    Converted the Int16 value 340 to the UInt32 value 340.
//    Converted the Int16 value 32767 to the UInt32 value 32767.
let numbers = [| Int16.MinValue; -132s; 0s; 121s; 16103s; Int16.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"The {number.GetType().Name} value {number} is outside the range of the UInt32 type."
// The example displays the following output:
//    The Int16 value -32768 is outside the range of the UInt32 type.
//    The Int16 value -132 is outside the range of the UInt32 type.
//    Converted the Int16 value '0' to the UInt32 value 0.
//    Converted the Int16 value '121' to the UInt32 value 121.
//    Converted the Int16 value '16103' to the UInt32 value 16103.
//    Converted the Int16 value '32767' to the UInt32 value 32767.
Dim numbers() As Short = { Int16.MinValue, -1, 0, 121, 340, Int16.MaxValue }
Dim result As UInteger

For Each number As Short In numbers
   Try
      result = Convert.ToUInt32(number)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                           number.GetType().Name, number, _
                           result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        number.GetType().Name, number)
   End Try
Next
' The example displays the following output:
'    The Int16 value -32768 is outside the range of the UInt32 type.
'    The Int16 value -1 is outside the range of the UInt32 type.
'    Converted the Int16 value 0 to the UInt32 value 0.
'    Converted the Int16 value 121 to the UInt32 value 121.
'    Converted the Int16 value 340 to the UInt32 value 340.
'    Converted the Int16 value 32767 to the UInt32 value 32767.

Gilt für:

ToUInt32(Double)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen Gleitkommazahl mit doppelter Genauigkeit in eine entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(double value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (double value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : double -> uint32
Public Shared Function ToUInt32 (value As Double) As UInteger

Parameter

value
Double

Die zu konvertierende Gleitkommazahl mit doppelter Genauigkeit.

Gibt zurück

value, auf die nächste 32-Bit-Ganzzahl ohne Vorzeichen gerundet. Wenn value genau zwischen zwei ganzen Zahlen liegt, wird die gerade Zahl zurückgegeben (d. h. 4,5 wird in 4 und 5,5 in 6 konvertiert).

Attribute

Ausnahmen

value ist kleiner als 0 (null) oder größer als UInt32.MaxValue.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Array von Double Werten in eine ganze Zahl ohne Vorzeichen zu konvertieren.

double[] values= { Double.MinValue, -1.38e10, -1023.299, -12.98,
                   0, 9.113e-16, 103.919, 17834.191, Double.MaxValue };
uint result;

foreach (double value in values)
{
   try {
      result = Convert.ToUInt32(value);
      Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//    The Double value -1.79769313486232E+308 is outside the range of the UInt32 type.
//    The Double value -13800000000 is outside the range of the UInt32 type.
//    The Double value -1023.299 is outside the range of the UInt32 type.
//    The Double value -12.98 is outside the range of the UInt32 type.
//    Converted the Double value '0' to the UInt32 value 0.
//    Converted the Double value '9.113E-16' to the UInt32 value 0.
//    Converted the Double value '103.919' to the UInt32 value 104.
//    Converted the Double value '17834.191' to the UInt32 value 17834.
//    The Double value 1.79769313486232E+308 is outside the range of the UInt32 type.
let numbers = 
    [| Double.MinValue; -1.38e10; -1023.299; -12.98
       0; 9.113e-16; 103.919; 17834.191; Double.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"{number} is outside the range of the UInt32 type."
// The example displays the following output:
//    -1.79769313486232E+308 is outside the range of the UInt32 type.
//    -13800000000 is outside the range of the UInt32 type.
//    -1023.299 is outside the range of the UInt32 type.
//    -12.98 is outside the range of the UInt32 type.
//    Converted the Double value '0' to the UInt32 value 0.
//    Converted the Double value '9.113E-16' to the UInt32 value 0.
//    Converted the Double value '103.919' to the UInt32 value 104.
//    Converted the Double value '17834.191' to the UInt32 value 17834.
//    1.79769313486232E+308 is outside the range of the UInt32 type.
Dim values() As Double = { Double.MinValue, -1.38e10, -1023.299, -12.98, _
                           0, 9.113e-16, 103.919, 17834.191, Double.MaxValue }
Dim result As UInteger

For Each value As Double In values
   Try
      result = Convert.ToUInt32(value)
      Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.", _
                        value.GetType().Name, value, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        value.GetType().Name, value)
   End Try
Next
' The example displays the following output:
'    The Double value -1.79769313486232E+308 is outside the range of the UInt32 type.
'    The Double value -13800000000 is outside the range of the UInt32 type.
'    The Double value -1023.299 is outside the range of the UInt32 type.
'    The Double value -12.98 is outside the range of the UInt32 type.
'    Converted the Double value '0' to the UInt32 value 0.
'    Converted the Double value '9.113E-16' to the UInt32 value 0.
'    Converted the Double value '103.919' to the UInt32 value 104.
'    Converted the Double value '17834.191' to the UInt32 value 17834.
'    The Double value 1.79769313486232E+308 is outside the range of the UInt32 type.

Weitere Informationen

Gilt für:

ToUInt32(Decimal)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen Dezimalzahl in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::Decimal value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (decimal value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : decimal -> uint32
Public Shared Function ToUInt32 (value As Decimal) As UInteger

Parameter

value
Decimal

Die zu konvertierende Dezimalzahl.

Gibt zurück

value, auf die nächste 32-Bit-Ganzzahl ohne Vorzeichen gerundet. Wenn value genau zwischen zwei ganzen Zahlen liegt, wird die gerade Zahl zurückgegeben (d. h. 4,5 wird in 4 und 5,5 in 6 konvertiert).

Attribute

Ausnahmen

value ist kleiner als 0 (null) oder größer als UInt32.MaxValue.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Array von Decimal Werten in eine ganze Zahl ohne Vorzeichen zu konvertieren.

decimal[] values= { Decimal.MinValue, -1034.23m, -12m, 0m, 147m,
                    199.55m, 9214.16m, Decimal.MaxValue };
uint result;

foreach (decimal value in values)
{
   try {
      result = Convert.ToUInt32(value);
      Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//    The Decimal value -79228162514264337593543950335 is outside the range of the UInt32 type.
//    The Decimal value -1034.23 is outside the range of the UInt32 type.
//    The Decimal value -12 is outside the range of the UInt32 type.
//    Converted the Decimal value '0' to the UInt32 value 0.
//    Converted the Decimal value '147' to the UInt32 value 147.
//    Converted the Decimal value '199.55' to the UInt32 value 200.
//    Converted the Decimal value '9214.16' to the UInt32 value 9214.
//    The Decimal value 79228162514264337593543950335 is outside the range of the UInt32 type.
let numbers = 
    [| Decimal.MinValue; -1034.23m; -12m; 0m; 147m; 9214.16m; Decimal.MaxValue |]

for number in numbers do
    try
        let result = Convert.ToUInt16 number
        printfn $"Converted the {number.GetType().Name} value '{number}' to the {result.GetType().Name} value {result}."
    with :? OverflowException ->
        printfn $"{number} is outside the range of the UInt32 type."
// The example displays the following output:
//    -79228162514264337593543950335 is outside the range of the UInt32 type.
//    -1034.23 is outside the range of the UInt32 type.
//    -12 is outside the range of the UInt32 type.
//    Converted the Decimal value '0' to the UInt32 value 0.
//    Converted the Decimal value '147' to the UInt32 value 147.
//    Converted the Decimal value '9214.16' to the UInt32 value 9214.
//    79228162514264337593543950335 is outside the range of the UInt32 type.
Dim values() As Decimal = { Decimal.MinValue, -1034.23d, -12d, 0d, 147d, _
                            199.55d, 9214.16d, Decimal.MaxValue }
Dim result As UInteger

For Each value As Decimal In values
   Try
      result = Convert.ToUInt32(value)
      Console.WriteLine("Converted the {0} value '{1}' to the {2} value {3}.", _
                        value.GetType().Name, value, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("{0} is outside the range of the UInt32 type.", _
                        value)
   End Try
Next
' The example displays the following output:
'    -79228162514264337593543950335 is outside the range of the UInt32 type.
'    -1034.23 is outside the range of the UInt32 type.
'    -12 is outside the range of the UInt32 type.
'    Converted the Decimal value '0' to the UInt32 value 0.
'    Converted the Decimal value '147' to the UInt32 value 147.
'    Converted the Decimal value '199.55' to the UInt32 value 200.
'    Converted the Decimal value '9214.16' to the UInt32 value 9214.
'    79228162514264337593543950335 is outside the range of the UInt32 type.

Weitere Informationen

Gilt für:

ToUInt32(Object)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert des angegebenen Objekts in eine 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::Object ^ value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (object value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (object? value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : obj -> uint32
Public Shared Function ToUInt32 (value As Object) As UInteger

Parameter

value
Object

Ein Objekt, das die IConvertible-Schnittstelle implementiert, oder null.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht, oder 0 (null), wenn value gleich null ist.

Attribute

Ausnahmen

value weist kein geeignetes Format auf.

Die IConvertible-Schnittstelle wird von value nicht implementiert.

- oder -

Die Konvertierung wird nicht unterstützt.

value stellt eine Zahl dar, die kleiner als UInt32.MinValue oder größer als UInt32.MaxValue ist.

Beispiele

Im folgenden Beispiel wird versucht, jedes Element in einem Objektarray in eine ganze Zahl ohne Vorzeichen zu konvertieren.

object[] values = { true, -12, 163, 935, 'x', new DateTime(2009, 5, 12),
                    "104", "103.0", "-1",
                    "1.00e2", "One", 1.00e2, 16.3e42};
uint result;

foreach (object value in values)
{
   try {
      result = Convert.ToUInt32(value);
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                        value.GetType().Name, value,
                        result.GetType().Name, result);
   }
   catch (OverflowException) {
      Console.WriteLine("The {0} value '{1}' is outside the range of the UInt32 type.",
                        value.GetType().Name, value);
   }
   catch (FormatException) {
      Console.WriteLine("The {0} value {1} is not in a recognizable format.",
                        value.GetType().Name, value);
   }
   catch (InvalidCastException) {
      Console.WriteLine("No conversion to a UInt32 exists for the {0} value '{1}'.",
                        value.GetType().Name, value);
   }
}
// The example displays the following output:
//    Converted the Boolean value True to the UInt32 value 1.
//    The Int32 value '-12' is outside the range of the UInt32 type.
//    Converted the Int32 value 163 to the UInt32 value 163.
//    Converted the Int32 value 935 to the UInt32 value 935.
//    Converted the Char value x to the UInt32 value 120.
//    No conversion to a UInt32 exists for the DateTime value '5/12/2009 12:00:00 AM'.
//    Converted the String value 104 to the UInt32 value 104.
//    The String value 103.0 is not in a recognizable format.
//    The String value '-1' is outside the range of the UInt32 type.
//    The String value 1.00e2 is not in a recognizable format.
//    The String value One is not in a recognizable format.
//    Converted the Double value 100 to the UInt32 value 100.
//    The Double value '1.63E+43' is outside the range of the UInt32 type.
let values: obj[] =
    [| true; -12; 163; 935; 'x'; DateTime(2009, 5, 12)
       "104"; "103.0"; "-1"; "1.00e2"; "One"; 1.00e2 |]

for value in values do
    try
        let result = Convert.ToUInt16 value
        printfn $"Converted the {value.GetType().Name} value '{value}' to the {result.GetType().Name} value {result}."
    with 
    | :? OverflowException ->
        printfn $"The {value.GetType().Name} value {value} is outside the range of the UInt32 type."
    | :? FormatException ->
        printfn $"The {value.GetType().Name} value {value} is not in a recognizable format."
    | :? InvalidCastException ->
        printfn $"No conversion to a UInt16 exists for the {value.GetType().Name} value {value}."
// The example displays the following output:
//    Converted the Boolean value 'True' to the UInt32 value 1.
//    The Int32 value -12 is outside the range of the UInt32 type.
//    Converted the Int32 value '163' to the UInt32 value 163.
//    Converted the Int32 value '935' to the UInt32 value 935.
//    Converted the Char value 'x' to the UInt32 value 120.
//    No conversion to a UInt16 exists for the DateTime value 5/12/2009 12:00:00 AM.
//    Converted the String value '104' to the UInt32 value 104.
//    The String value 103.0 is not in a recognizable format.
//    The String value -1 is outside the range of the UInt32 type.
//    The String value 1.00e2 is not in a recognizable format.
//    The String value One is not in a recognizable format.
//    Converted the Double value '100' to the UInt32 value 100.
Dim values() As Object = { True, -12, 163, 935, "x"c, #5/12/2009#, _
                           "104", "103.0", "-1", _
                           "1.00e2", "One", 1.00e2, 16.3e42}
Dim result As UInteger

For Each value As Object In values
   Try
      result = Convert.ToUInt32(value)
      Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                        value.GetType().Name, value, _
                        result.GetType().Name, result)
   Catch e As OverflowException
      Console.WriteLine("The {0} value {1} is outside the range of the UInt32 type.", _
                        value.GetType().Name, value)
   Catch e As FormatException
      Console.WriteLine("The {0} value {1} is not in a recognizable format.", _
                        value.GetType().Name, value)
   Catch e As InvalidCastException
      Console.WriteLine("No conversion to a UInt32 exists for the {0} value {1}.", _
                        value.GetType().Name, value)

   End Try
Next
' The example displays the following output:
'    Converted the Boolean value True to the UInt32 value 1.
'    The Int32 value -12 is outside the range of the UInt32 type.
'    Converted the Int32 value 163 to the UInt32 value 163.
'    Converted the Int32 value 935 to the UInt32 value 935.
'    Converted the Char value x to the UInt32 value 120.
'    No conversion to a UInt32 exists for the DateTime value 5/12/2009 12:00:00 AM.
'    Converted the String value 104 to the UInt32 value 104.
'    The String value 103.0 is not in a recognizable format.
'    The String value -1 is outside the range of the UInt32 type.
'    The String value 1.00e2 is not in a recognizable format.
'    The String value One is not in a recognizable format.
'    Converted the Double value 100 to the UInt32 value 100.
'    The Double value 1.63E+43 is outside the range of the UInt32 type.

Hinweise

Der Rückgabewert ist das Ergebnis des Aufrufs der IConvertible.ToUInt32 -Methode des zugrunde liegenden Typs von value.

Gilt für:

ToUInt32(Byte)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den Wert der angegebenen 8-Bit-Ganzzahl ohne Vorzeichen in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(System::Byte value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (byte value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : byte -> uint32
Public Shared Function ToUInt32 (value As Byte) As UInteger

Parameter

value
Byte

Die zu konvertierende 8-Bit-Ganzzahl ohne Vorzeichen.

Gibt zurück

Eine 32-Bit-Ganzzahl ohne Vorzeichen, die value entspricht.

Attribute

Beispiele

Im folgenden Beispiel wird jedes Element in einem Bytearray in eine ganze Zahl ohne Vorzeichen konvertiert.

byte[] bytes = { Byte.MinValue, 14, 122, Byte.MaxValue};
uint result;

foreach (byte byteValue in bytes)
{
   result = Convert.ToUInt32(byteValue);
   Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.",
                     byteValue.GetType().Name, byteValue,
                     result.GetType().Name, result);
}
// The example displays the following output:
//    Converted the Byte value 0 to the UInt32 value 0.
//    Converted the Byte value 14 to the UInt32 value 14.
//    Converted the Byte value 122 to the UInt32 value 122.
//    Converted the Byte value 255 to the UInt32 value 255.
let bytes = [| Byte.MinValue; 14uy; 122uy; Byte.MaxValue |]

for byteValue in bytes do
    let result = Convert.ToUInt16 byteValue
    printfn $"Converted the {byteValue.GetType().Name} value '{byteValue}' to the {result.GetType().Name} value {result}."
// The example displays the following output:
//       Converted the Byte value '0' to the UInt32 value 0.
//       Converted the Byte value '14' to the UInt32 value 14.
//       Converted the Byte value '122' to the UInt32 value 122.
//       Converted the Byte value '255' to the UInt32 value 255.
Dim bytes() As Byte = { Byte.MinValue, 14, 122, Byte.MaxValue}
Dim result As UInteger

For Each byteValue As Byte In bytes
   result = Convert.ToUInt32(byteValue)
   Console.WriteLine("Converted the {0} value {1} to the {2} value {3}.", _
                     byteValue.GetType().Name, byteValue, _
                     result.GetType().Name, result)
Next
' The example displays the following output:
'    Converted the Byte value 0 to the UInt32 value 0.
'    Converted the Byte value 14 to the UInt32 value 14.
'    Converted the Byte value 122 to the UInt32 value 122.
'    Converted the Byte value 255 to the UInt32 value 255.

Gilt für:

ToUInt32(Boolean)

Wichtig

Diese API ist nicht CLS-kompatibel.

Konvertiert den angegebenen booleschen Wert in die entsprechende 32-Bit-Ganzzahl ohne Vorzeichen.

public:
 static System::UInt32 ToUInt32(bool value);
[System.CLSCompliant(false)]
public static uint ToUInt32 (bool value);
[<System.CLSCompliant(false)>]
static member ToUInt32 : bool -> uint32
Public Shared Function ToUInt32 (value As Boolean) As UInteger

Parameter

value
Boolean

Der zu konvertierende boolesche Wert.

Gibt zurück

Die Zahl 1, wenn valuetrue ist, andernfalls 0 (null).

Attribute

Beispiele

Im folgenden Beispiel werden die booleschen Werte true und false in ganze Zahlen ohne Vorzeichen konvertiert.

bool falseFlag = false;
bool trueFlag = true;

Console.WriteLine("{0} converts to {1}.", falseFlag,
                  Convert.ToUInt32(falseFlag));
Console.WriteLine("{0} converts to {1}.", trueFlag,
                  Convert.ToUInt32(trueFlag));
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.
let falseFlag = false
let trueFlag = true

printfn $"{falseFlag} converts to {Convert.ToInt32 falseFlag}."
printfn $"{trueFlag} converts to {Convert.ToInt32 trueFlag}."
// The example displays the following output:
//       False converts to 0.
//       True converts to 1.
Dim falseFlag As Boolean = False
Dim trueFlag As Boolean = True

Console.WriteLine("{0} converts to {1}.", falseFlag, _
                  Convert.ToUInt32(falseFlag))
Console.WriteLine("{0} converts to {1}.", trueFlag, _
                  Convert.ToUInt32(trueFlag))
' The example displays the following output:
'       False converts to 0.
'       True converts to 1.

Gilt für: