Single.NaN Pole

Definicja

Reprezentuje nieprawidłową liczbę ( NaN ).Represents not a number (NaN). To pole jest stałe.This field is constant.

public: float NaN = NaN;
public const float NaN = NaN;
val mutable NaN : single
Public Const NaN As Single  = NaN

Wartość pola

Single

Przykłady

Poniższy przykład ilustruje NaN stałą.The following example demonstrates the NaN constant.

Single zero = 0;

// This condition will return false.
if ( (0 / zero) == Single::NaN )
{
   Console::WriteLine( "0 / 0 can be tested with Single::NaN." );
}
else
{
   Console::WriteLine( "0 / 0 cannot be tested with Single::NaN; use Single::IsNan() instead." );
}
Single zero = 0;

// This condition will return false.
if ((0 / zero) == Single.NaN)
{
    Console.WriteLine("0 / 0 can be tested with Single.NaN.");
}
else
{
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.");
}
Dim zero As Single = 0

' This condition will return false.
If (0 / zero) = Single.NaN Then
    Console.WriteLine("0 / 0 can be tested with Single.NaN.")
Else
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.")
End If

Uwagi

Metoda lub operator zwraca NaN , gdy wynik operacji jest niezdefiniowany.A method or operator returns NaN when the result of an operation is undefined. Na przykład wynik dzielenia zera przez zero to NaN , jak pokazano w poniższym przykładzie.For example, the result of dividing zero by zero is NaN, as the following example shows. (Ale należy zauważyć, że dzielenie liczby niezerowej przez zero zwraca albo PositiveInfinity lub NegativeInfinity , w zależności od znaku dzielnika).(But note that dividing a non-zero number by zero returns either PositiveInfinity or NegativeInfinity, depending on the sign of the divisor.)

float zero = 0.0f;
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero);
// The example displays the following output:
//         0 / 0 = NaN      
Dim zero As Single = 0
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero)
' The example displays the following output:
'         0 / 0 = NaN      

Ponadto wywołanie metody z NaN wartością lub operacją w NaN zwracanej wartości NaN , jak pokazano w poniższym przykładzie.In addition, a method call with a NaN value or an operation on a NaN value returns NaN, as the following example shows.

float nan1 = Single.NaN;

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1);
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1));
// The example displays the following output:
//       3 + NaN = NaN
//       Abs(NaN) = NaN
Dim nan1 As Single = Single.NaN

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1)
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1))
' The example displays the following output:
'       3 + NaN = NaN
'       Abs(NaN) = NaN

Użyj IsNaN metody, aby określić, czy wartość nie jest liczbą.Use the IsNaN method to determine whether a value is not a number. Ogólnie rzecz biorąc Single Operatory nie mogą być używane do porównywania Single.NaN z innymi Single wartościami, chociaż metody porównania (takie jak Equals i CompareTo ) mogą.In general, Single operators cannot be used to compare Single.NaN with other Single values, although comparison methods (such as Equals and CompareTo) can. Poniższy przykład ilustruje różnice w zachowaniu między Single operatorami i metodami porównania.The following example illustrates the difference in behavior between Single comparison operators and methods.

using System;

public class Example
{
   public static void Main()
   {
      Console.WriteLine("NaN == NaN: {0}", Single.NaN == Single.NaN); 
      Console.WriteLine("NaN != NaN: {0}", Single.NaN != Single.NaN); 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("! NaN.Equals(NaN): {0}", ! Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN));
      
      Console.WriteLine("\nNaN > NaN: {0}", Single.NaN > Single.NaN); 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= Single.NaN); 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN);
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f); 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f); 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f);
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.NaN)); 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)); 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)); 
   }
}
// The example displays the following output:
//       NaN == NaN: False
//       NaN != NaN: True
//       NaN.Equals(NaN): True
//       ! NaN.Equals(NaN): False
//       IsNaN: True
//
//       NaN > NaN: False
//       NaN >= NaN: False
//       NaN < NaN: False
//       NaN < 100.0: False
//       NaN <= 100.0: False
//       NaN >= 100.0: False
//       NaN.CompareTo(NaN): 0
//       NaN.CompareTo(100.0): -1
//       (100.0).CompareTo(Single.NaN): 1
Module Example
   Public Sub Main()
      Console.WriteLine("NaN = NaN: {0}", Single.NaN = Single.NaN) 
      Console.WriteLine("NaN <> NaN: {0}", Single.NaN <> Single.NaN) 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("Not NaN.Equals(NaN): {0}", Not Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN))
      Console.WriteLine()
      Console.WriteLine("NaN > NaN: {0}", Single.NaN > 100.0f) 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= 100.0f) 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN)
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f) 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f) 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f)
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.Nan)) 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)) 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)) 
   End Sub
End Module
' The example displays the following output:
'       NaN == NaN: False
'       NaN != NaN: True
'       NaN.Equals(NaN): True
'       ! NaN.Equals(NaN): False
'       IsNaN: True
'
'       NaN > NaN: False
'       NaN >= NaN: False
'       NaN < NaN: False
'       NaN < 100.0: False
'       NaN <= 100.0: False
'       NaN >= 100.0: False
'       NaN.CompareTo(NaN): 0
'       NaN.CompareTo(100.0): -1
'       (100.0).CompareTo(Single.NaN): 1

Dotyczy

Zobacz też